Re: [HowTo] Upload your 3d Printer Firmware in Linux
Posted: Fri Dec 09, 2016 9:35 pm
Hello,
Bonjour ,
You will find the original text translated into English following this original French text.
Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.
Un grand merci à mediaklan !
Je suis sous Linux Kubuntu depuis 2004 (aujourd'hui j'utilise la version 16.04 64 bits en français).
J'ai acheté le 24 septembre 2016 une imprimante 3D delta Geeetech Rostock 301 (M301) qui utilise la carte contrôleur GTM32 Pro et un capteur 3D Touch.
Malheureusement, le micrologiciel n'est pas Open Source et Geeetech n'offre pas de méthode sous Linux pour télécharger le fichier BIN dans la carte contrôleur GTM32 Pro.
La dernière version du micrologiciel en date d'aujourd'hui est là :
http://www.geeetech.com/forum/download/file.php?id=2726
Ou voir la page : http://www.geeetech.com/forum/viewtopic ... 20&t=18167
Est-ce que vous auriez la générosité de :
1) Nous fournir la procédure pour télécharger le fichier ROSTOCK301_V1.0.0.2.bin avec l'IDE Arduino Linux sur la carte contrôleur GTM32 Pro.
2) Est-ce que pour cette imprimante et cette carte contrôleur GTM32 Pro 32 bits, vous savez si on peut remplacer le micrologiciel propriétaire de Geeetech par une autre version de Marlin ou d'un autre source de micrologiciel pour imprimante 3D ?
Encore un grand merci !
Cordialement,
L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,
Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!
You will find the original text translated into English following this original French text.
Many big thanks to mediaklan!
I am on Linux Kubuntu since 2004 (today I use the version 16.04 64 bits in French).
I bought on September 24, 2016 a 3D delta Geeetech Rostock 301 (M301) which uses the GTM32 Pro controller card and a 3D Touch sensor.
Unfortunately, the firmware is not Open Source and Geeetech does not offer a Linux method to download the BIN file into the GTM32 Pro controller card.
The latest firmware version of today is here:
http://www.geeetech.com/forum/download/file.php?id=2726
Or see the page: http://www.geeetech.com/forum/viewtopic ... 20&t=18167
Would you have the generosity of:
1) Provide us the procedure to download the ROSTOCK301_V1.0.0.2.bin file with the Arduino Linux IDE on the GTM32 Pro Controller Card.
2) Does this printer and this 32-bit GTM32 Pro controller card know whether you can replace the Geeetech proprietary firmware with another version of Marlin or another source of 3D printer firmware?
Another great thank you!
Cordially,
Friend René
Bonjour ,
You will find the original text translated into English following this original French text.
Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.
Un grand merci à mediaklan !
Je suis sous Linux Kubuntu depuis 2004 (aujourd'hui j'utilise la version 16.04 64 bits en français).
J'ai acheté le 24 septembre 2016 une imprimante 3D delta Geeetech Rostock 301 (M301) qui utilise la carte contrôleur GTM32 Pro et un capteur 3D Touch.
Malheureusement, le micrologiciel n'est pas Open Source et Geeetech n'offre pas de méthode sous Linux pour télécharger le fichier BIN dans la carte contrôleur GTM32 Pro.
La dernière version du micrologiciel en date d'aujourd'hui est là :
http://www.geeetech.com/forum/download/file.php?id=2726
Ou voir la page : http://www.geeetech.com/forum/viewtopic ... 20&t=18167
Est-ce que vous auriez la générosité de :
1) Nous fournir la procédure pour télécharger le fichier ROSTOCK301_V1.0.0.2.bin avec l'IDE Arduino Linux sur la carte contrôleur GTM32 Pro.
2) Est-ce que pour cette imprimante et cette carte contrôleur GTM32 Pro 32 bits, vous savez si on peut remplacer le micrologiciel propriétaire de Geeetech par une autre version de Marlin ou d'un autre source de micrologiciel pour imprimante 3D ?
Encore un grand merci !
Cordialement,
L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,
Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!
You will find the original text translated into English following this original French text.
Many big thanks to mediaklan!
I am on Linux Kubuntu since 2004 (today I use the version 16.04 64 bits in French).
I bought on September 24, 2016 a 3D delta Geeetech Rostock 301 (M301) which uses the GTM32 Pro controller card and a 3D Touch sensor.
Unfortunately, the firmware is not Open Source and Geeetech does not offer a Linux method to download the BIN file into the GTM32 Pro controller card.
The latest firmware version of today is here:
http://www.geeetech.com/forum/download/file.php?id=2726
Or see the page: http://www.geeetech.com/forum/viewtopic ... 20&t=18167
Would you have the generosity of:
1) Provide us the procedure to download the ROSTOCK301_V1.0.0.2.bin file with the Arduino Linux IDE on the GTM32 Pro Controller Card.
2) Does this printer and this 32-bit GTM32 Pro controller card know whether you can replace the Geeetech proprietary firmware with another version of Marlin or another source of 3D printer firmware?
Another great thank you!
Cordially,
Friend René