A30M Extruding different lengths between sides for same feed length

Post Reply
Deadeye
Posts: 14
Joined: Wed Nov 27, 2019 3:11 am

A30M Extruding different lengths between sides for same feed length

Post by Deadeye » Mon Sep 07, 2020 8:29 pm

Hi, I have an A30M and I’m trying to calibrate the Filament steps. I have it set to 140 and when I try to extrude 100mm, on E0 it extrudes 90mm and on E1 it extruders 100mm. Any ideas why there is a difference?

User avatar
William
Site Admin
Posts: 6338
Joined: Tue Jun 07, 2016 9:38 am

Re: A30M Extruding different lengths between sides for same feed length

Post by William » Tue Sep 08, 2020 9:31 am

Hello, the tightness of your extruder gear may be the cause of this phenomenon, you can calibrate the extruder, you can refer to the link below for calibration. :D
https://www.youtube.com/watch?v=xzQjtWhg9VE
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply