Have You tried to change the extrusion multiplier for the filament?
Depending on filament, nozzle etc. You should change it from 1.0 to 1.1 or 1.2.
extruder extruding too slow!!!!
- vykiholmes
- Posts: 2
- Joined: Fri Jan 04, 2019 11:43 pm
- Location: UK
Re: extruder extruding too slow!!!!
hi
i've had same prob only extruder is fine when manually send code to extrude 1-100mm but during prints it just wasn't coming out.
My fix consisted of e step calibration & firmware update.
i've had same prob only extruder is fine when manually send code to extrude 1-100mm but during prints it just wasn't coming out.
My fix consisted of e step calibration & firmware update.
Re: extruder extruding too slow!!!!
Could you attach the gcode file?vykiholmes wrote: ↑Wed Feb 20, 2019 1:28 pmhi
i've had same prob only extruder is fine when manually send code to extrude 1-100mm but during prints it just wasn't coming out.
My fix consisted of e step calibration & firmware update.
We can use it and test it.
cheers
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!