Extruder not working

Post Reply
szempo
Posts: 6
Joined: Tue Sep 27, 2016 2:33 pm

Re: Extruder not working

Post by szempo » Tue Sep 27, 2016 2:57 pm

What could be the problem it is not my video. But the engine is doing it for me.

https://www.youtube.com/watch?v=8uDWvakQ9JE

Filament come and Gt2560 hand menu. Prepare / moves / 0.1 / extruder ...

If sd card printer body layer OK! 4mm brim OK! Part print failed.

Pictures failed print. https://drive.google.com/drive/folders/ ... sp=sharing

szempo
Posts: 6
Joined: Tue Sep 27, 2016 2:33 pm

Re: Extruder not working

Post by szempo » Tue Sep 27, 2016 3:08 pm

It's not my fault my video but it seems [0:27.]
Engine Ranking.

https://www.youtube.com/watch?v=8uDWvakQ9JE

manual (hand) pressure filament filament coming.
Mt2560 controll board extruding filament coming.
G-code print brim ok, first layer ok. the other is wrong.
attachement pictures:

https://drive.google.com/drive/folders/ ... sp=sharing

szempo
Posts: 6
Joined: Tue Sep 27, 2016 2:33 pm

Re: Extruder not working

Post by szempo » Tue Sep 27, 2016 3:11 pm

It's not my fault my video but it seems [0:27.]
Engine Ranking.

https://www.youtube.com/watch?v=8uDWvakQ9JE

manual (hand) pressure filament filament coming.
Mt2560 controll board extruding filament coming.
G-code print brim ok, first layer ok. the other is wrong.
attachement pictures:

https://drive.google.com/drive/folders/ ... sp=sharing

szempo
Posts: 6
Joined: Tue Sep 27, 2016 2:33 pm

Re: Extruder not working

Post by szempo » Tue Sep 27, 2016 3:25 pm

[0:27]Engine Ranking.

https://www.youtube.com/watch?v=8uDWvakQ9JE

manual (hand) pressure filament filament coming.
Mt2560 controll board extruding filament coming.
G-code print brim ok, first layer ok. the other is wrong.
attachement pictures:

https://drive.google.com/drive/folders/ ... sp=sharing

User avatar
William
Site Admin
Posts: 6338
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder not working

Post by William » Tue Sep 27, 2016 6:25 pm

szempo wrote:[0:27]Engine Ranking.

https://www.youtube.com/watch?v=8uDWvakQ9JE

manual (hand) pressure filament filament coming.
Mt2560 controll board extruding filament coming.
G-code print brim ok, first layer ok. the other is wrong.
attachement pictures:

https://drive.google.com/drive/folders/ ... sp=sharing
Looks like it's a print quality,you can refer to this to make some troubleshooting:
https://www.simplify3d.com/support/prin ... eshooting/
BTW,what model is your printer?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

szempo
Posts: 6
Joined: Tue Sep 27, 2016 2:33 pm

Re: Extruder not working

Post by szempo » Tue Sep 27, 2016 7:14 pm

Dear William!

I've seen the page, but the failure of the engine ranking.
Why not come filament out extruder head.


Geeetech prusa i3 pro b mt2560

Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: Extruder not working

Post by Toy » Wed Sep 28, 2016 11:00 am

The extruder problem might be because the driver of extruder is overheated, you need make sure the driver is cooled well, or you can swap the driver of extruder with other axis.

holbrookt
Posts: 1
Joined: Tue Oct 11, 2016 8:25 pm

Re: Extruder not working

Post by holbrookt » Tue Oct 11, 2016 8:34 pm

Hello, I just built the GeeeTech Prusa i3 Pro B. Finally worked out all the kinks, except for when I went to do a test print the Extruder is feeding the filament in reverse. In the user manual, it says this is a known problem and to fix it in the firmware. However, I have no clue how to do so. I'm not all that computer savvy, I'm a machine trades instructor for a high school. Thank you

User avatar
William
Site Admin
Posts: 6338
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder not working

Post by William » Wed Oct 12, 2016 11:55 am

holbrookt wrote:Hello, I just built the GeeeTech Prusa i3 Pro B. Finally worked out all the kinks, except for when I went to do a test print the Extruder is feeding the filament in reverse. In the user manual, it says this is a known problem and to fix it in the firmware. However, I have no clue how to do so. I'm not all that computer savvy, I'm a machine trades instructor for a high school. Thank you
Hello,
Looks like the extruder motor has a wrong direction,you can refer to the following post to modify the direction:
http://www.geeetech.com/forum/viewtopic ... 17&t=17037
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

szempo
Posts: 6
Joined: Tue Sep 27, 2016 2:33 pm

Re: Extruder not working

Post by szempo » Mon Oct 17, 2016 5:34 pm

William Kwok wrote:
szempo wrote:[0:27]Engine Ranking.

https://www.youtube.com/watch?v=8uDWvakQ9JE

manual (hand) pressure filament filament coming.
Mt2560 controll board extruding filament coming.
G-code print brim ok, first layer ok. the other is wrong.
attachement pictures:

https://drive.google.com/drive/folders/ ... sp=sharing
Looks like it's a print quality,you can refer to this to make some troubleshooting:
https://www.simplify3d.com/support/prin ... eshooting/
BTW,what model is your printer?

PROBLEM SOLVED
:)

the movie stepper motor bricking/jumping...

https://www.youtube.com/watch?v=8uDWvakQ9JE

X axis moving and printing the stepper motor connection loose,wobble.

Solved a Quick Ties :roll: :roll: :oops: :oops:
https://drive.google.com/open?id=0BwcWS ... 9RRHpXSlR3

Or replacement fix connection wiring stepper...

Post Reply