Page 3 of 3

Re: FAQ

Posted: Wed Sep 23, 2015 11:23 pm
by Mark
No, it will still work unless it's melted. If just jammed, you can heat it up to about 210 for PLA and 230 for ABS, pull out the filament and use a drill to push the rest filament out form the nozzle.

Re: FAQ

Posted: Thu Sep 24, 2015 12:01 am
by fotomickey
Hi Mark

Please refer to my original post, The J head did melt at 210 start bubbling leak out from the joint between head and plastic bellow. It become impossible to unclogged. The manufacture J head dissamble video don't really help or mus guide in the cleaning purpose https://youtu.be/OQG97plWXl0