GT2560 - Fan 1,2 and 3 does not work

Post Reply
TM-234
Posts: 2
Joined: Sat Mar 31, 2018 3:22 am

GT2560 - Fan 1,2 and 3 does not work

Post by TM-234 » Sat Jul 28, 2018 8:32 am

I need help to make them working, my PWM is working ( 2 pin ), now I have a extra fan who does not want to work, I tried in plug FAN 1,2 and 3.... nothing ! I have a Anet 8.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: GT2560 - Fan 1,2 and 3 does not work

Post by Gingko » Sat Jul 28, 2018 5:37 pm

Have you checked the voltage of these fan slot when turn on the power?

TM-234
Posts: 2
Joined: Sat Mar 31, 2018 3:22 am

Re: GT2560 - Fan 1,2 and 3 does not work

Post by TM-234 » Sat Aug 04, 2018 6:40 am

No, but these fans are 12 V.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: GT2560 - Fan 1,2 and 3 does not work

Post by _kaktus_ » Tue Aug 07, 2018 2:52 am

Hi
:mrgreen:

Listen to Gingko's advice and check if this voltage is present in the connector socket.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply