Stepper motor skipping!!

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Stepper motor skipping!!

Post by William » Tue Jan 15, 2019 9:17 am

I think you need to check the A4988 at first.
1.You can try to swap the problem one to the normal one.
Then you can know the result.
2.Check your travel speed<120mm/s
3.Try to adjust the vref of the A4988 to 1.1V
;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply