Hello,
I'm trying to get the TemperatureWebPanel working for now about 2 days, but it simply wont work.
I've created the directory arduino/www/ on my USB-Flash, also the bridge is working, but if I want to open "http://YUN_IP/arduino/temperaturewebpanel/ the only thing I see is an empty page ...
I would be very happy, if you could help me!
Leon
Iduino Yun Shield - Can Not Use The USB-Flash
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Iduino Yun Shield - Can Not Use The USB-Flash
You can refer to this page, hope it will help you:
http://www.geeetech.com/wiki/index.php/ ... nt.2Fsd.3F
http://www.geeetech.com/wiki/index.php/ ... nt.2Fsd.3F
Re: Iduino Yun Shield - Can Not Use The USB-Flash
Of course I've already read that one, but it doesn't help...
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Iduino Yun Shield - Can Not Use The USB-Flash
You must have something left out. The tutorial in wiki was tested before posted.
-
- Posts: 2
- Joined: Sun Feb 21, 2016 12:19 am
Re: Iduino Yun Shield - Can Not Use The USB-Flash
I too cannot use USB stick.
I have enabled mount point and Iduino had recognised my stick as it was offered in a drop-down.
Mount point is not shown as connected
Stick is prepared with required directories but nothing is loaded when I upload TemperatureWebPanel
Your Wiki is very weak on this point, it suggests USB is mounted automatically without any setting, please improve this tutorial
I have enabled mount point and Iduino had recognised my stick as it was offered in a drop-down.
Mount point is not shown as connected
Stick is prepared with required directories but nothing is loaded when I upload TemperatureWebPanel
Your Wiki is very weak on this point, it suggests USB is mounted automatically without any setting, please improve this tutorial