3D Touch is great!

Post Reply
jzero42
Posts: 39
Joined: Wed Aug 29, 2018 4:45 am

3D Touch is great!

Post by jzero42 » Sun Dec 30, 2018 6:23 am

First of all, I bought a Geeetech 3D Touch for my I3 Pro B printer, and it works great!

But I think Geeetech should put a little more effort in to make it much more easy to install. As someone said: the wires are short, and need some rewiring (into the 2 pole connector).

If Geeetech could make this a "just pop it in and plug it in" (and configure) type component, this could be an easy upsell or profit maker -- my printer works so reliably now and leveling is perfect!
Also, please take care to update the instructions, too, to be more clear.

User avatar
_kaktus_
Site Admin
Posts: 1254
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: 3D Touch is great!

Post by _kaktus_ » Thu Jan 10, 2019 3:09 am

Hello.
:mrgreen:

Your opinion is very valuable.
You simply want the product to be user-friendly ...
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Loadmaster
Posts: 1
Joined: Fri Sep 27, 2019 11:48 am

Re: 3D Touch is great!

Post by Loadmaster » Sat Sep 28, 2019 9:05 am

I wish I could say the same. I'm not having luck with the 3D Touch. The best repeatable numbers are far above the specs. .5mm. I'll most likely send the two I purchased back. One is a little better than the other, but not by much. My original BL Touch was very consistent at 0.03mm. So much for trying the 3D Touch. :(

User avatar
William
Site Admin
Posts: 4938
Joined: Tue Jun 07, 2016 9:38 am

Re: 3D Touch is great!

Post by William » Sat Sep 28, 2019 9:22 am

:D Hi,Loadmaster.You can provide your specific question,
Let's solve it together.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests