Printing problem on the aluminum prusa i3

Post Reply
Ddman114
Posts: 8
Joined: Mon Aug 07, 2017 12:14 am

Printing problem on the aluminum prusa i3

Post by Ddman114 » Wed Sep 13, 2017 8:24 am

So finally I've tried my first print the end result is a barely finished spagetti mess.
I stated the print and everything seemed fine the place filament coming out of the nosle and all seemed fine until I noticed the filament came out very wavy/curly and all over making the farthest thing from a clean line the second problem being that the filament stopped coming out of the nosle about a minute into a 10 minute print.
I don't know if I bought a kit with a broken extruder or im just retarded I'm not sure.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printing problem on the aluminum prusa i3

Post by William » Sat Sep 16, 2017 8:48 am

Maybe the nozzle is clogged and you have to clean it.
You can refer to this video to clean it.
https://www.youtube.com/watch?v=3iS8YU_TNEw
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply