Hotbed dosn't warm up

Post Reply
derolf
Posts: 2
Joined: Wed Feb 15, 2017 5:14 pm

Hotbed dosn't warm up

Post by derolf » Fri Jun 30, 2017 3:43 pm

I have a problem with my board GT2650. :?:
The hotbed is no longer warm. At first, it was only sometimes warm, then no more.
The voltage at the terminals of the board is 0 volts. :o
I still have warranty. What can I do? :(

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hotbed dosn't warm up

Post by William » Fri Jun 30, 2017 3:56 pm

It is best to check your hot bed line connection,especially with the board.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

derolf
Posts: 2
Joined: Wed Feb 15, 2017 5:14 pm

Re: Hotbed dosn't warm up

Post by derolf » Sat Jul 01, 2017 11:25 pm

Sorry, but there is no Voltage on the board for the hotbed. The line connection to the hotbed is ok.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hotbed dosn't warm up

Post by William » Tue Jul 04, 2017 9:19 am

Now, we can make sure that the board has some problems, you can check your printer referring to the following post:
http://www.geeetech.com/forum/viewtopic ... 19&t=17039
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply