geeetech pro c and hot end

Post Reply
Marc71
Posts: 12
Joined: Fri Feb 17, 2017 11:13 pm

geeetech pro c and hot end

Post by Marc71 » Wed Apr 26, 2017 4:56 pm

Hello


i broke the Hot end screw and i ordered from geeetech a replacement i ask them to send me the exact same hotend with the screw as that come original with the printer. they send me not the same piece and they say it is the same.

I send them picture and they don't seem to understand.

can someone help please.


I attach pictures and a video of what i mean.

Broken part
broken part_r.jpg
broken part
broken part_r.jpg (276.92 KiB) Viewed 3882 times
new from Geeetech
20170425_041043_r.jpg
new from Geeetech
20170425_041043_r.jpg (310.11 KiB) Viewed 3882 times
Here is a video of what i mean https://youtu.be/nvmS78dKRLo

Thank you

User avatar
William
Site Admin
Posts: 4323
Joined: Tue Jun 07, 2016 9:38 am

Re: geeetech pro c and hot end

Post by William » Thu Apr 27, 2017 3:30 pm

Hi,you can send the video to your seller about it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Marc71
Posts: 12
Joined: Fri Feb 17, 2017 11:13 pm

Re: geeetech pro c and hot end

Post by Marc71 » Thu Apr 27, 2017 7:01 pm

I purchased from Aliexpress. I did send and hope they understand me.

kasparp
Posts: 2
Joined: Wed Oct 08, 2014 8:46 pm

Re: geeetech pro c and hot end

Post by kasparp » Thu Sep 07, 2017 7:26 pm

Anyone know where spare nozzle throat to the Pro C can be purchased? all the ones i bought are threaded all the way up like one shown above.

Newopint95
Posts: 76
Joined: Sun Mar 12, 2017 8:14 pm

Re: geeetech pro c and hot end

Post by Newopint95 » Fri Sep 08, 2017 8:13 am

That looks like the correct part to me. In the video he keeps showing how it wont slide in, thats because it has to be threaded in. His old one had all the threads striped off thats why it looked different.

kasparp
Posts: 2
Joined: Wed Oct 08, 2014 8:46 pm

Re: geeetech pro c and hot end

Post by kasparp » Fri Sep 08, 2017 2:01 pm

It is not the right part, there is no room on the inside of the block it goes into, I have the same setup it cannot be threaded in.

Edit: The threads are removed from factory, the throat is fastened with a small screw that locks it in place not threads.

User avatar
William
Site Admin
Posts: 4323
Joined: Tue Jun 07, 2016 9:38 am

Re: geeetech pro c and hot end

Post by William » Sat Sep 16, 2017 9:34 am

The throat rod of the single MK8 extruder is different from the throat rod of the dual extruder.
So, you need to tell the seller you need a hot-end of the dual extruder for Pro C.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests