Prusa I3XPro Acrylic extruder mount

Post Reply
Darius
Posts: 4
Joined: Wed Mar 08, 2017 6:45 am

Prusa I3XPro Acrylic extruder mount

Post by Darius » Thu Mar 09, 2017 7:34 am

Hi,
Are there drawings available for the extruder mount? I want to try and fit an E3D nozzle in there but I think I'll need a slightly different hole size.
I have access to a laser cutter so can make a new mount but it would be a lot easier with the drawing to start with.
Top
Post Reply

Return to “Products FAQ”