Defect 3D touch

Post Reply
GeneralFives
Posts: 1
Joined: Sat Mar 14, 2020 3:14 am

Defect 3D touch

Post by GeneralFives » Sat Mar 14, 2020 3:18 am

Hello
i ordered the 3D Touch and install it Un my New A30m the Problem ist that it pushes down but doesnt push up after that.... Also if u Do it manual.
Thanks for help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Defect 3D touch

Post by William » Sat Mar 14, 2020 10:25 am

:D Hi, are you referring to the fact that the probe itself is not scalable,
You can adjust the screws on the top of 3d touch.
If it is degaussed,
Remagnetization can be performed using magnetite.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pattie008
Posts: 5
Joined: Mon Sep 14, 2020 8:23 pm

Re: Defect 3D touch

Post by pattie008 » Sat Feb 27, 2021 8:35 pm

still the same problem i orderd at jan 2021 and i have the same problem they refund me because the can't fix the problem

Post Reply