Page 1 of 1
Blue screen after pressing reset
Posted: Sun Jan 19, 2020 7:17 pm
I wanted to upgrade Marlin with files given by geeetech. I installed CH340 driver, started Firware Tool from geeetech, drop .hex file, click on upload local while holding reset, Nothing happened but now I have a blue screen on my printer and impossible to print something...
Re: Blue screen after pressing reset
Posted: Mon Jan 20, 2020 9:36 am
Hi, If your printer can upload firmware normally,
No need to press the reset button while uploading;
You can try the firmware again.
Then check if your wiring is loose and tighten the screen wiring.
Can your printer print via USB connection to a computer?