A20T and 3DTouch firmware

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Wed Jan 29, 2020 3:09 am

hi Vert.
I figuratively put it about the "big problem" comparable to an elephant. I don’t, you don’t eat an elephant at a time, so I offered to eat piece by piece.

1.you have an a20t printer. right?
2. with or without tach?
3.did you easily replace Marlin Marlin 1.1.8 with more recent Marlin 2.?

Thank you
Yaroslav
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Wed Jan 29, 2020 11:29 pm

Hi vert
if put a 3dtouch on the printer, then it will not work now on marlin 2.0, right?
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Thu Jan 30, 2020 4:39 am

hi Vert.
and what is the test? what do you need?
another experimental printer or what?
If this printer does not kill, am I ready to try under your leadership? :)
Well, if of course it is possible :)
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Thu Jan 30, 2020 4:43 am

Vert

I'm interested in this because I want to get a full-featured printer + learn something new, stretch the brain a little.
and the second reason, since my daughter draws in my subjective opinion is not bad, I want to transfer some drawings to 3D and, as they say, feel with my hands. :)
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Thu Jan 30, 2020 11:34 pm

hi vert
clear,
Something came to Paypal Donation: https://www.paypal.me/vertabreaker,
otherwise I have doubts
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Fri Jan 31, 2020 5:02 am

why I asked a question: because it just showed up a slightly different name and it confused me :)
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Fri Jan 31, 2020 5:06 am

question, marlin 2.0 is installed on the same hardware as 1.8?
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Fri Jan 31, 2020 5:11 am

yes 1.1.8
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Fri Jan 31, 2020 5:14 am

ok
A20T with 3DTouch

Yaroslav
Posts: 20
Joined: Sun Jan 19, 2020 5:34 am
Location: Russia

Re: A20T and 3DTouch firmware

Post by Yaroslav » Mon Feb 10, 2020 5:55 pm

Hi Vert.
excellent!!! I will try to see today !! :)

Thank you
Yaroslav
A20T with 3DTouch

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests