GT2560 V4.0 Wiring

Post Reply
gabrifabbr
Posts: 3
Joined: Sun Jun 02, 2019 9:39 pm

GT2560 V4.0 Wiring

Post by gabrifabbr » Sun Aug 30, 2020 7:06 pm

Hello, I bought a GT2560 v4.0, but sadly weren't provided any instructions nor information in order to put it in my Geeetech A20M.

I've come down to the last issue, as per picture.

Can anyone point me on which pin is which from v3 to v4?

Thank you very much.
Confronto_Pin.png
Confronto_Pin.png (115.02 KiB) Viewed 1107 times

User avatar
William
Site Admin
Posts: 6331
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 V4.0 Wiring

Post by William » Mon Aug 31, 2020 11:24 am

Hello, gt2560v4.0 has a special hot-end adapter board, which cannot correspond to 3.0. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

gabrifabbr
Posts: 3
Joined: Sun Jun 02, 2019 9:39 pm

Re: GT2560 V4.0 Wiring

Post by gabrifabbr » Mon Aug 31, 2020 4:50 pm

You look like someone knowing his stuff. Can you provide full detailed instructions on how to go from v3 to v4? Than you!! :-D

Post Reply