Page 1 of 1
FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Posted: Tue Jan 28, 2020 5:07 pm
by YvonGeee
Hi Geeetech team,
Those FAQs seems outdated for me, no A20x mention, ...
Can you update those?
Also when will you release official Marlin v2 for A20M ?
Thanks
Re: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Posted: Thu Jan 30, 2020 6:15 pm
by William
Hi，thanks for your feedback.
we will discuss.
Re: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Posted: Sat Feb 01, 2020 4:37 am
by Jarda3d
Re: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Posted: Mon Feb 03, 2020 8:22 pm
by YvonGeee
Hi Vert,
I meant officially available here on the Geeetech website
Nevertheless, I got your latest build yesterday and successfully updated my A20M without any issue.
I used "Cyclops" for the head, you confirm it is the proper define to use?
I was wondering if there is a place with the explanation of all the various menus and parameters from the MarlinV2 somewhere (like in the official printer user guide)?
Because I see tons of changes compared to the old Marlin that came default with the printer.
Also, if 3DWifi really compatible with A20M? I can connect the module to my internet, I can see the module with the app on IOS but the printer is always offline...
Thanks!
Yvon
Re: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Posted: Tue Feb 04, 2020 5:30 pm
by YvonGeee
You are doing a really fantastic job here, of course you need Geeetech to endorse you!!!!
I finally got my 3DWifi to see the printer and correctly controls it.
USB must be plugged after the printer is on.
Anyway, still trying to understand the real usage of that thing
Re: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Posted: Wed Jun 17, 2020 11:23 pm
by Brig
Hello,
I just bought a geeetech A20m and a 3D wifi module. I tried to install it with easyprint 3d on my iphone 7+ as recommended in the furnished manual but I never managed to get the page which allow to scan the QR code of my printer so the printer is always oofline. So I can't change the baud rate. So I get the same trouble as Yvon. Can anyone help us? Thanks in advance. Brigitte
YvonGeee wrote: ↑Mon Feb 03, 2020 8:22 pm
Hi Vert,
I meant officially available here on the Geeetech website
Nevertheless, I got your latest build yesterday and successfully updated my A20M without any issue.
I used "Cyclops" for the head, you confirm it is the proper define to use?
I was wondering if there is a place with the explanation of all the various menus and parameters from the MarlinV2 somewhere (like in the official printer user guide)?
Because I see tons of changes compared to the old Marlin that came default with the printer.
Also, if 3DWifi really compatible with A20M? I can connect the module to my internet, I can see the module with the app on IOS but the printer is always offline...
Thanks!
Yvon