3D Touch Sensor:Auto-levelling for Geeetech 3D printer

JohnQuix
Posts: 36
Joined: Mon Aug 01, 2016 8:20 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by JohnQuix » Mon Oct 24, 2016 3:21 pm

I would really like to hook my 3DTouch to my MeCreator 2. Does anybody know how to wire it correctly? Also has anyone found a good way to mount it?

Jumpbase
Posts: 3
Joined: Mon Oct 03, 2016 10:13 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by Jumpbase » Mon Oct 24, 2016 4:41 pm

I've made a holder for the left side of the extruder, i can upload it when i'm at home

JohnQuix
Posts: 36
Joined: Mon Aug 01, 2016 8:20 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by JohnQuix » Mon Oct 24, 2016 7:42 pm

Awesome thanks!

Jumpbase
Posts: 3
Joined: Mon Oct 03, 2016 10:13 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by Jumpbase » Mon Oct 24, 2016 9:01 pm

It's not perfect but it works
http://www.thingiverse.com/thing:1846793

baxbax
Posts: 6
Joined: Thu May 26, 2016 2:19 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by baxbax » Tue Oct 25, 2016 1:22 am

@Marco
So you mean the Sensor works fine during the calibration but the nozzle is not in the right position when printing?
If you do,decrease the value "-1.4" in the following codes:
CODE: SELECT ALL
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4

You can decrease it to "-1.9" first to see if it makes a difference.
I think, that something did go wrong. Now when I switch on the 3D printer, the 3DTouch sensor, starts up and down, but after blinks.

User avatar
William
Site Admin
Posts: 3710
Joined: Tue Jun 07, 2016 9:38 am

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by William » Tue Oct 25, 2016 11:51 am

baxbax wrote:
@Marco
So you mean the Sensor works fine during the calibration but the nozzle is not in the right position when printing?
If you do,decrease the value "-1.4" in the following codes:
CODE: SELECT ALL
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4

You can decrease it to "-1.9" first to see if it makes a difference.
I think, that something did go wrong. Now when I switch on the 3D printer, the 3DTouch sensor, starts up and down, but after blinks.
Maybe you can have a try on what i told @elfag.blogg.no before.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
William
Site Admin
Posts: 3710
Joined: Tue Jun 07, 2016 9:38 am

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by William » Tue Oct 25, 2016 11:52 am

Jumpbase wrote:It's not perfect but it works
http://www.thingiverse.com/thing:1846793
Nice work,how did it perform?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

baxbax
Posts: 6
Joined: Thu May 26, 2016 2:19 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by baxbax » Tue Oct 25, 2016 2:04 pm

William Kwok wrote:
baxbax wrote:
@Marco
So you mean the Sensor works fine during the calibration but the nozzle is not in the right position when printing?
If you do,decrease the value "-1.4" in the following codes:
CODE: SELECT ALL
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4

You can decrease it to "-1.9" first to see if it makes a difference.
I think, that something did go wrong. Now when I switch on the 3D printer, the 3DTouch sensor, starts up and down, but after blinks.
Maybe you can have a try on what i told @elfag.blogg.no before.
Thanks. I will try. I hope , it is the same thing.

User avatar
William
Site Admin
Posts: 3710
Joined: Tue Jun 07, 2016 9:38 am

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by William » Tue Oct 25, 2016 2:13 pm

You can have a try first.
Attach a video about your issue please if it doesn't fix it.
Good Luck
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

JohnQuix
Posts: 36
Joined: Mon Aug 01, 2016 8:20 pm

Re: 3D Touch Sensor:Auto-levelling for Geeetech 3D printer

Post by JohnQuix » Tue Oct 25, 2016 8:50 pm

@Jumpbase

Do you use this in conjunction with http://www.thingiverse.com/thing:1838009 ?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest