Marlin 2 with 2560 v4.0. Is it possible?

Post Reply
Willi1972
Posts: 2
Joined: Sun Jan 31, 2021 12:46 am

Marlin 2 with 2560 v4.0. Is it possible?

Post by Willi1972 » Sun Jan 31, 2021 12:49 am

Hi all,

I can find Marlin 2.0 firmware updates on the Geeetech site for v4.1 boards, but not for 4.0 boards. Is this possible? Can anyone provide me with a link?

Regards

Willi1972
Posts: 2
Joined: Sun Jan 31, 2021 12:46 am

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by Willi1972 » Sat Feb 06, 2021 2:33 pm

Anyone?

demon-knight
Posts: 4
Joined: Sun Mar 21, 2021 2:30 am

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by demon-knight » Sun Mar 21, 2021 3:28 pm

Would also like to know this , haven't found any as of yet.

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by Admin » Mon Mar 22, 2021 6:09 pm

Hello, geeetech's A10 and A20 support the marlin upgrade of 4.0 motherboards. You can find help in the firmware section of the forum. Some users share how to upgrade using VSC.
This is the video link:
https://www.youtube.com/watch?v=54GY_vWica0

demon-knight
Posts: 4
Joined: Sun Mar 21, 2021 2:30 am

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by demon-knight » Thu Mar 25, 2021 3:44 am

I can install the firmware no problem, its getting it to work with a bltouch.
It would be much easier if you uploaded an official 2.x for the v4.0 board to the main site

alf26540
Posts: 4
Joined: Thu Mar 04, 2021 3:25 pm

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by alf26540 » Tue Apr 20, 2021 2:25 pm

hello
I have a A20M with 2560 V4.0 that I just passed in Marlin 2.0.7 of my design with TMC 2209 and BLtouch. I noticed that this could not be done with Arduino IDE, even using the site tutorials. You must use VS CODE with plateform INO and no problem even better.For those who wish I make the firm available

demon-knight
Posts: 4
Joined: Sun Mar 21, 2021 2:30 am

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by demon-knight » Fri Apr 23, 2021 1:48 am

alf26540 wrote:
Tue Apr 20, 2021 2:25 pm
hello
I have a A20M with 2560 V4.0 that I just passed in Marlin 2.0.7 of my design with TMC 2209 and BLtouch. I noticed that this could not be done with Arduino IDE, even using the site tutorials. You must use VS CODE with plateform INO and no problem even better.For those who wish I make the firm available
If you dont mind that would be great even just posing your configuration.h file would be a help

alf26540
Posts: 4
Joined: Thu Mar 04, 2021 3:25 pm

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by alf26540 » Sun Apr 25, 2021 2:29 pm

herewith configuration.h, configuration_adv.h and version;h marlin 2.0.7 for A20M
Attachments
Marlin.rar
configuration, configuration_adv and version (MARLIN2.0.7) A20M
(77.84 KiB) Downloaded 305 times

demon-knight
Posts: 4
Joined: Sun Mar 21, 2021 2:30 am

Re: Marlin 2 with 2560 v4.0. Is it possible?

Post by demon-knight » Wed Apr 28, 2021 1:41 am

alf26540 wrote:
Sun Apr 25, 2021 2:29 pm
herewith configuration.h, configuration_adv.h and version;h marlin 2.0.7 for A20M
Nice one cheers

Post Reply