Geeetech

Hello. :mrgreen: I am pleased to inform you that the new controllers for GT printers will soon be in the hands of customers. :D Newly designed controller boards were created. For 8-bit version: GT2560-V4.0 For 32-bit version: Smartto-V1.0 Thanks to the courtesy of the GT staff, I can present new des...

Hello tomriddlepotter.


Your idea is not a bad one, but it will also eliminate another phenomenon you don't know about yet.

Hello. :mrgreen: If this controller board has sufficient number of control inputs and outputs you can start this experiment. First of all, look for a firmware with the right functionality you want. Then you have to read a lot about how to connect the sensors. You need to know the order of the leads ...

Hi.


Greetings and good luck with your experiments.

Hi


And William did it for me.

I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
Have you already found a subforum for your printer model

Greetings to you, sir.

Hello.


this is called layers shifting, it can be solved successfully.

Hello. :mrgreen: This happens when the filament does not find an outlet, or is fed too quickly. So it's worth it: Level the heated bed, Adjust the gap between the nozzle and the heated bed surface, Adjust the temperature of the hot end, Check that the Teflon Bowden tubes are properly cut and suffici...

Hello.



You can always make a purchase in the company shop.
https://www.geeetech.com/2-in-1-out-dua ... -1038.html

Hello huyenvu111


In my opinion, your goal can be achieved with an existing version of the controller.
Of course, some accessories will need to be replaced.
I suggest that you start your project by finding the firmware in the required version for your controller board.

Hello.


EasyPrint has not been developed by GT for some time now.
Therefore, there may be some conflicts.

It's a pity, but we can't influence it