Geeetech

Like i saw you in the yesterday post,i've try both solution (that from thinkiverse,and from geetech)

Anyway...the solution of thinkiverse it's the same....i have no control on my 3d touch
I wanna lunch it out the window

I reverse the logic of endstop.....same things // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the lo...

Ok when come back at home,I try!!!

01:03:01.708 : echo:enqueueing "M280 P0 S160" 01:03:04.998 : echo:enqueueing "M280 P0 S120" 01:03:08.211 : echo:enqueueing "M280 P0 S10" 01:03:10.320 : echo:enqueueing "M280 P0 S90" This is what's app when i try to reset,autotest,extend,retract. But nothing happen to 3dtouch If i try to move the pro...

I try to flash.Same things...doesn't work

true....same pin
When come back at home i write yours

infact zmin i've eliminate

I try your firm....but there is not my board. gt2560 rev B

yep...but in one of solution there is a change of pin zmin and max

Ah....and how i have to wire? using thinkiverse or thread here on forum?

Yeah me too.
I stay in v2
where i find yours?
my printer it's the first version with rev b board