Geeetech

Did you use Z-hop 0.1mm or not? If not, then use it and print it again. Leaky mixing extruder need it else you can lost Z steps. Try my profile for A10M on A20M. Mixing extruder need many options for better print to be disabled or non standard settings used.

Did you render gcode? Is tower full or is broken in gcode?

Restart Cura, your OS... repeat slicing.... look at gcode.

I did not use color mixer (done in gcode by hand)... But Z-hop 0.1mm is very needed for mixing extruder, at least at A10M. Try my actual profile, it was massive updated and you did not need to remove discs in hotend assembly. Sample gcode included for untouched printer (E-steps 340). Try to print th...

Slic3r A10M 3D printer profile ============================== Slic3r A10M 191230 - Cards tuned.zip Also on GITHUB: https://github.com/Jardal/A10M-Slic3r-profile Included example of dual color print without bucket and without tower This is content of the folder and file structure from c:\Users\[yourn...

He could think that tube is inserted, but... lot of plastics residue in the cooler inside. Very hard to push it out thru hot tip with supplied rod, it will be good to supply 4mm rod too (4mm drill did not helps because it does not have flat end).

Try 60mm waste with bucket (I do not use tower).

For same material use 30-50mm.

If you have my A10M profiles, there are for 340 E-steps, so you need to set this in your printer before printing. I was measure, that there should be 451 steps by free flow (430 claims Gee), but I have excessive pressured filament (I have printed lever, Gee lever was broken both after 2 months)). Th...

too tightened extruder enclosure

Facebook friends are the fastest way how to say "look, I am idiot!". Mylar plate is....like price optimalization, not usefull thing. The black glass from Geeetech is the best way to printing - without glue, easy to remove, good for 3d farm. Throw away mylar plate and buy glass - ordinal glass (or mi...

If it is produced by Cura, look at specific custom gcodes if cura have it.

Else you can search in the text editor for M109 command in gcode file and delete it all except initialization (M109 S..... - temperature) and finish (M109 S0).