Search found 70 matches

by MichaelK
Tue Aug 28, 2018 1:05 am
Forum: Software
Topic: I am having problems getting config setting to apply correctly....I think this is the correct place to post this...
Replies: 8
Views: 18542

Re: I am having problems getting config setting to apply correctly....I think this is the correct place to post this...

First set alle configurations to default values. To many changes from all options are making bad prints at the beginning of 3D Print. After that and bad prints, you can use Cura. It's free to use. Cura take all settings you want. 250% speed etc. But carefully! You could damage your printer with wron...
by MichaelK
Tue Aug 28, 2018 12:57 am
Forum: Software
Topic: I am having problems getting config setting to apply correctly....I think this is the correct place to post this...
Replies: 8
Views: 18542

Re: I am having problems getting config setting to apply correctly....I think this is the correct place to post this...

Wich printer are you using? A30? Correct? i think, the travel speed with 115mm/s to high. Reduce them under 70mm/s for a test. Filament flow with 250% is high too... You could use Cura to slice too. https://ultimaker.com/en/products/ultimaker-cura-software Cura using many many options. At the beginn...
by MichaelK
Mon Aug 27, 2018 11:21 pm
Forum: Geeetech A10 Series
Topic: Geeetech A10 firmware Marlin 1.1.9
Replies: 78
Views: 152876

Re: Geeetech A10 firmware Marlin 1.1.9

Update: New version on thingiverse.

I found a small bug into the firmware with the cooling fan to cooling up the printing object.
Bug fixed now. :mrgreen:
by MichaelK
Mon Aug 27, 2018 11:12 pm
Forum: Geeetech A10 Series
Topic: A10 PRINTING ISSUES !!!
Replies: 11
Views: 27856

Re: A10 PRINTING ISSUES !!!

First: _kaktus_ said: Heatbed leveling!!! Second: Print the calibration cube you see as attachment. (Unzip file and save them onto the SD-Card, put them into the A10 and print) don't change any internals into the gcode file please. The 20x20x20mm cube made for A10 with a A10 profile into Cura. My ow...
by MichaelK
Sat Aug 25, 2018 11:13 pm
Forum: Geeetech A10 Series
Topic: Centering A10 Printer
Replies: 8
Views: 13586

Re: Centering A10 Printer

Printersettings in Cura.
Left side: heatbed
Right side: Postion from the extruder

cura_a10.jpeg
cura_a10.jpeg (113.48 KiB) Viewed 13557 times
by MichaelK
Sat Aug 25, 2018 8:57 pm
Forum: Geeetech A10 Series
Topic: Centering A10 Printer
Replies: 8
Views: 13586

Re: Centering A10 Printer

Hello :) First,check the size of the heatbed please. The printer will be selling with a 220x220 bed and optional you can sell a 230x230 bed. My own presale A10 using a 230x230 heatbed. I made my own firmware to correct the size into the Marlin firmware, this is the only way to do it! You found them ...
by MichaelK
Fri Aug 24, 2018 10:46 pm
Forum: Geeetech A10 Series
Topic: Geeetech A10 firmware Marlin 1.1.9
Replies: 78
Views: 152876

Re: Geeetech A10 firmware Marlin 1.1.9

bernte_one:
so the guide has not the highest prority for me, but i hope to see it on monday
:lol: no, was a joke


I'am faster :lol:
Into my blog you found a description easy to update the firmware. 8-)
by MichaelK
Fri Aug 24, 2018 5:40 pm
Forum: Geeetech A10 Series
Topic: Geeetech A10 firmware Marlin 1.1.9
Replies: 78
Views: 152876

Re: Geeetech A10 firmware Marlin 1.1.9

Of course! Many people ask me about how to install the firmware. :)
There a many possibilities and one of them is the easiest way to do it!

One of my remaining points is to write a tutorial to install a new firmware. :D
:arrow: Please have some patience. :!:
by MichaelK
Fri Aug 24, 2018 12:38 pm
Forum: Geeetech A10 Series
Topic: Replacing the glass on the heated be of A10
Replies: 7
Views: 12442

Re: Replacing the glass on the heated be of A10

Sounds interesting and they make it easy to say: look into the forum...... :?

You could heat up a corner from the bed with a external fan heater and carefully try to tell the corner with a spatula.
Thats all i can think of.
And do it carefully! Use safety goggles!!!