Geeetech

I guess your moderators don't like my posts ...well I must admit they don't show your product at its best...

yup...30mm apart...on the X axis....no variance on the Y axis...

Here are my current experimental extruder settings

i have noticed no difference in implementing it...on printing. I make the settings and have even tried saving and rebooting...nothing..no change...so, I think...once again, software not talking to hardware..? who knows...only the programmer..

The belt passageway is way too small...
The belt drags on the fixing wrap of the belt...causing skipping and miss alignment...
solution ....move the belt attachment away from the area...widen the belt gap

result smooth operation regardless of belt tension...no jumping...perfect prints every time...

I have done this.... but mine still prints two completely different parts. There is no change... is there a more practical way to go about this.....??? It took me 2 months to get the correct firmware for the heads to actually print....and I have been struggling with it ever since... broken and melte...

Is there a offset setting for the dual heads ... The test print, prints two different parts where it should be one. (that would be the test print from you guys) What is the offset setting....how and where do I go to get it to talk to the Prusa Pro firmware I have tried setting it in slicer using -12...

My Prusa 3i pro c is now printing like a champ on both heads..thanks to the new firmware. :D I have a new issue now. Print jobs not staying put till they are done... I have tried increasing the bed heat to max 135c but it still gets knocked off. Any suggestions on how to make jobs stick till they ar...

I STILL HAVEN'T HEARD FROM CUSTOMER SERVICE...I ALSO SEE I AM NOT THE ONLY ONE WITH THIS PROBLEM...WILL THERE BE A SOLUTION SOON, OR WILL I HAVE TO BUT THE $80.00 BOARD? SKU: 700-001-0270 DO I RETURN THE NON WORKING BOARD? WILL I BE COMPENSATED FOR THE BOARD THAT IS NOT WORKIG? IF I BUY A NEW BOARD ...

[url]IMG_2890.png{/url] Can any one tell me why the extruders heads say off at the bottom of this picture? My extruders have not been working since I have put the machine together, all indications every thing is correct ...firmware uploaded, control board voltage measured correctly at 1.v. I was tol...

The extruders heat up 200 degrees...it goes through the entire test program, but through it all the extruders does not advance the filament or attempt to turn once... Neither one no mater what computer I use...so please send me the firmware that makes this thing work or direct me words a board that ...