I was using cura 3.2.1? I think it is (latest version) at the time, and was printing the wind turbine thing.
I doubt if this helps any but you never know.
Search found 61 matches
- Fri Mar 16, 2018 10:21 pm
- Forum: Geeetech I3 Pro B
- Topic: ProW LCD2004 screen blocks
- Replies: 9
- Views: 10192
- Fri Mar 16, 2018 10:12 pm
- Forum: Geeetech I3 Pro B
- Topic: ProW LCD2004 screen blocks
- Replies: 9
- Views: 10192
Re: ProW LCD2004 screen blocks
Thanx kaktus, No I haven't tried an older firmware, not sure how to get one for the pro w, or do you mean try the pro b or a firmware? Can't understand why it would do that halfway into a print and stay like that if its software issue Could it be this eeprom? thing? Not quite sure what that is, I as...
- Tue Mar 13, 2018 9:13 pm
- Forum: Geeetech I3 Pro B
- Topic: ProW LCD2004 screen blocks
- Replies: 9
- Views: 10192
Re: ProW LCD2004 screen blocks
if you had read the original post, you would see i have already tried all of those. ive even tried tech support and got the same reply( nobody seems to read my post) 1.ive reuploaded the firmware more than once 2.ive swapped the SD cable over with the LCD cable, didnt work 3. turned the cable, round...
- Sat Mar 10, 2018 9:18 pm
- Forum: Geeetech I3 Pro B
- Topic: ProW LCD2004 screen blocks
- Replies: 9
- Views: 10192
ProW LCD2004 screen blocks
while i was in the middle of printing my screen went like this https://i.imgur.com/Wc6yADQ.jpg i have tried turning off and on, still the same ive tried swapping the cable round, still the same i even swapped the LCD cable with the SD cable, still the same and i have tried uploading firmware (throug...
- Fri Feb 02, 2018 10:16 pm
- Forum: Geeetech I3 Pro B
- Topic: cooling fan for pro w
- Replies: 1
- Views: 4870
cooling fan for pro w
hi all, ok, im trying to install a part cooling fan for the pro w. i have taken the extension cable you get with the kit and cut in half, i then soldered the extruder fan to one half and plugged it in. the other half i have soldered a 3 wire fan which i am going to plug into the pwn slot, the wires ...
- Tue Jan 30, 2018 9:30 pm
- Forum: Geeetech I3 Pro B
- Topic: part cooling fan
- Replies: 5
- Views: 6601
Re: part cooling fan
thanx william, but i took them out and it is two fans joined together so i might use it as a fan to cool the board when i get round to putting the board and wires into some sort of housing if thats possible? specs are SUNON Maglev kde1207ptvx-a DC12v 2.8w made in china they both have two wires that ...
- Sun Jan 28, 2018 12:57 am
- Forum: Geeetech I3 Pro B
- Topic: part cooling fan
- Replies: 5
- Views: 6601
part cooling fan
hi all,
could i use the fans from an old x box 360 as a part cooling fan or would these be too big and heavy?
not sure on there exact size as i have took them out yet, but im sure they are going to be bigger than 40mm
im on a i3 pro w mk8 extruder
could i use the fans from an old x box 360 as a part cooling fan or would these be too big and heavy?
not sure on there exact size as i have took them out yet, but im sure they are going to be bigger than 40mm
im on a i3 pro w mk8 extruder
- Sun Jan 28, 2018 12:50 am
- Forum: Geeetech I3 Pro B
- Topic: Geeetech I3 PRO B - HOT END FAN: PROPELLER BROKE
- Replies: 3
- Views: 5938
Re: Geeetech I3 PRO B - HOT END FAN: PROPELLER BROKE
i broke a propeller on the the extruder fan as well but just swapped it over with the board fan as they are the same. they are both 2 pins but the extruder fan plugs into an extension which is 3 pins. mine is the pro w.
- Thu Jan 25, 2018 10:17 pm
- Forum: Firmware
- Topic: Firmware for geeetech 3D printers
- Replies: 388
- Views: 16777215
Re: Firmware for geeetech 3D printers
id like to convert this printer into a BIN!!!!!!!!!!!!
- Thu Jan 25, 2018 12:11 am
- Forum: Firmware
- Topic: Firmware for geeetech 3D printers
- Replies: 388
- Views: 16777215
Re: Firmware for geeetech 3D printers
i done a quick video to show what the problem is
https://youtu.be/qSNEYJga-7k
https://youtu.be/qSNEYJga-7k