Geeetech

hi,please see the link:http://www.geeetech.com/wiki/index.php/GT2560#Software_setting.please click the "device manager",then click "com&LPT.if the USB device is conected successfully,you will see a com for printer.and then you open the Arduino,select the right board and com in the Arduino.the clear ...

hi, stl file of spider has been uploaded.

hi，please screw up the nut on the rod.if so,the bolt can hold firmly.

Dear MEJiangster Maybe you are not familiar with the geeetech printer and you have so much problem.Before printing, please read the product manual. Regarding to the STL files, please open g-code files with repetier host,after slicer,you should save the g-code filesbeing edited,and put the edited fil...

hi,did all the driver not move or just the extruder driver not move.please give more detail.thx

hi,i have sent the stl file to you mailbox.

hi,your printer type is i3 pro C,dual extruder.why use the firmware for single extruder I3 pro b.Please burn the right firmware(refer th the attachment).

hi,here is the link for rostock G2.please follow the instrustion to debug your printer,especially the "Calibration of auto-leveling".First of all ,you need to put down the auto-leveling probe manualy.Don't omit any step. http://www.geeetech.com/wiki/index.php/Delta_Rostock_mini_G2s#Calibration_of_au...

1.please touch the extruder head to ensure that it was heated to 180.if not,maybe the extruder thermistor is good.
2.please check the stepper motor & cable & driver board.
3.if the above solutions don't work,please contact the customer service or leave the order number.

Hock wrote:I also wish got someone tell me how to do now.....

If reloading the firmware doesn't work,please leave the order number or contact the customer service.