Search found 116 matches

by Toy
Fri Sep 30, 2016 10:51 am
Forum: Products FAQ
Topic: Rostock 301 Z Probe?
Replies: 25
Views: 38130

Re: Rostock 301 Z Probe?

We are still working for that, if there's any further news, we'll let you know
by Toy
Fri Sep 30, 2016 10:47 am
Forum: Feedback&Suggestion
Topic: PWM Fanoutput on Extruder2 Pins?
Replies: 3
Views: 4080

Re: PWM Fanoutput on Extruder2 Pins?

There's a PWM fan slot on GT2560 board, didn't you see it?
PWM.png
PWM.png (357.57 KiB) Viewed 4072 times
by Toy
Fri Sep 30, 2016 10:33 am
Forum: Stepper Motor
Topic: Stepper Motor Drivers
Replies: 3
Views: 3871

Re: Stepper Motor Drivers

The subdivision of drv8825 is different form A4988. subdivision.png After changing a4988 to drv8825, the subdivision will be changed form 1/16 to 1/32, this means you need to change steps per mm in firmware refer to this link: http://prusaprinters.org/calculator/#steppers the value of steps per mm s...
by Toy
Fri Sep 30, 2016 9:23 am
Forum: Control Board
Topic: Delta M301 firmware ( Marlin )
Replies: 13
Views: 13949

Re: Delta M301 firmware ( Marlin )

Make sure the bowden tube have been plugged into the tube deepely enough. There's a possibility that the temperature is too high and the filament melt in the PTFE tube or the tube is expanded and then prevent the filament coming out to the nozzle. You can also disassemble the hotend and see if there...
by Toy
Thu Sep 29, 2016 9:04 am
Forum: Products FAQ
Topic: Rostock 301 Z Probe?
Replies: 25
Views: 38130

Re: Rostock 301 Z Probe?

Hi guys,
I'm afraid the printer 301 doesn't support the upgrade of auto-leveling, the firmware is not open source.
So there's no way to modify the firmware...
by Toy
Thu Sep 29, 2016 8:57 am
Forum: Control Board
Topic: GTM32, GTM32 pro
Replies: 8
Views: 8299

Re: GTM32, GTM32 pro

Sorry the boards are not for sale, so no wiki here.
If you guys have any query about the boards, you can contact technical support directly.
by Toy
Thu Sep 29, 2016 8:49 am
Forum: Extruder
Topic: Extruder switch off : MINTEMP when the wires move
Replies: 6
Views: 6193

Re: Extruder switch off : MINTEMP when the wires move

Hi,
You need to check this part, in most cases the connection problem of thermistor is due to the poor contact here
20160929084604.png
20160929084604.png (781 KiB) Viewed 6175 times
by Toy
Thu Sep 29, 2016 8:43 am
Forum: Extruder
Topic: Another problem with extruder feeding thread
Replies: 12
Views: 8913

Re: Another problem with extruder feeding thread

Seems you need to get a new feeder, you can contact the seller for that.
by Toy
Wed Sep 28, 2016 2:15 pm
Forum: Feedback&Suggestion
Topic: Hot bed doesn't heat
Replies: 7
Views: 5019

Re: Hot bed doesn't heat

Maybe something wrong with the slicer settings, how about try this: M201-PLA-0.4-1.75.zip M201-PLA-0.3-1.75.zip Make sure you've plugged the PTFE tube into hotend deeply enough and the hotend is not clogged. Here's a post, you can take it as a reference: http://www.geeetech.com/forum/viewtopic.php?f...
by Toy
Wed Sep 28, 2016 2:03 pm
Forum: Extruder
Topic: Extruder min temp error with new complete extruder
Replies: 2
Views: 2351

Re: Extruder min temp error with new complete extruder

This means your thermistor is open circuit, please check this part, see if there's a poor contact
20160928140034.png
20160928140034.png (833.72 KiB) Viewed 2345 times