Search found 362 matches

by Sherry
Tue Aug 04, 2015 11:25 am
Forum: Others
Topic: i need help with Heatbed MK2a
Replies: 23
Views: 11545

Re: i need help with Heatbed MK2a

Hello i have mesured the voltage here... there is no voltage and the corresponding lead is not glowing when i put the heat bed to heat. i think thats the problem , but i dont know how to fix it ... i mesured the resistence of the heat bed too 992Ω 992Ω and 991Ω I have an other problem, the Z axis c...
by Sherry
Tue Aug 04, 2015 11:14 am
Forum: Others
Topic: Extruder fan
Replies: 9
Views: 6632

Re: Extruder fan

hot end fan (pwn-fan) is controled by g-code.so it's running according to the code.
by Sherry
Tue Aug 04, 2015 11:10 am
Forum: Others
Topic: Delta GS2 hot end fan question
Replies: 2
Views: 1736

Re: Delta GS2 hot end fan question

rxn123talon wrote:The fan is connected per instructions for G2S -- Connect fan for hot end at FAN-PWM.
hi,pwm fan is controled by g-code.
by Sherry
Tue Aug 04, 2015 10:59 am
Forum: Firmware
Topic: Nozzles crashing into bed when homed
Replies: 8
Views: 5264

Re: Nozzles crashing into bed when homed

Hi people, I have the G2S Rostock kit, which is now assembled per the instructions. When trying to set up the printer, I have downloaded the firmware and uploaded this to the controller ( http://www.geeetech.com/wiki/index.php/Delta_Rostock_mini_G2#How_to_modify_and_upload_firmware) . I have set up...
by Sherry
Tue Aug 04, 2015 10:49 am
Forum: Assembly
Topic: Prusa I3 Pro B
Replies: 6
Views: 5327

Re: Prusa I3 Pro B

Following http://www.soonwell.com/ebay_file/App_pic/i35_21 Im on step 7.2, assembling the X-Axis Rods and ends. The screw locking fender that is supposed to be screwed down tight to the smooth rod has no set screws. Are there supposed to be some, am I supposed to use something else, or are they not...
by Sherry
Mon Aug 03, 2015 5:49 pm
Forum: Firmware
Topic: Firmware request GT2560
Replies: 27
Views: 19998

Re: Firmware request GT2560

Hi Can you please send me the firmware for the Prusi I3 X with the single motherboard GT2560 . The board you sent with my order does not recognise the display , flashed new Marlin firmware however the printer is not working correctly , eg does not respond to the limit switch activation Thanks hi, s...
by Sherry
Mon Aug 03, 2015 5:42 pm
Forum: Others
Topic: Problems setting up Delta G2S (auto-leveling)
Replies: 9
Views: 7856

Re: Problems setting up Delta G2S (auto-leveling)

view these coordinates,it seems that the auto-level is not successful.and maybe the hotbed is a little inclined.so please adjust the hot bed plane. then,you need to define z final axis height.those coordinate shows that the around point is higher than center.so you'd better adjust z axis height. mor...
by Sherry
Mon Aug 03, 2015 4:23 pm
Forum: Assembly
Topic: Can you show me where to plug in fans and end stops?
Replies: 2
Views: 2241

Re: Can you show me where to plug in fans and end stops?

hi,could you tell me your printer type?
if it is I3 PRUSA,those endstop wires should be connected x-min ,y-min ,z -min slot.
and there is no difference of Fan 1, Fan 2 and Fan 3 .but pwm fan is for turbofan which is used to cool nozzle.
by Sherry
Mon Aug 03, 2015 4:15 pm
Forum: Stepper Motor
Topic: Jerk in Z axis
Replies: 3
Views: 5700

Re: Jerk in Z axis

hello,shiva.your z axis appears to not move smothly.you can try to adjust those screws of 2 z-axis.it seems that the z axises are getting a little stuck.
by Sherry
Fri Jul 31, 2015 3:50 pm
Forum: Stepper Motor
Topic: Y axis stepper motor issue
Replies: 22
Views: 12925

Re: Y axis stepper motor issue

And also what do you mean by the Y driver board? You mean to swap the Y connector with X connector for example or to swap the servo motor? hi,Y driver board is stepper driver(A4988).Did you check your endstop?for example,you can swap x endstop with y.if y could home normally,that it's the endstop p...