Search found 362 matches

by Sherry
Wed Aug 05, 2015 11:35 am
Forum: Firmware
Topic: Mini G2 Firmware values
Replies: 7
Views: 5396

Re: Mini G2 Firmware values

hi,did the steper motor extruder run normally? at the same time ,please check whether there is jam in the nozzle.
by Sherry
Tue Aug 04, 2015 5:44 pm
Forum: Feedback&Suggestion
Topic: Power supply fan extremely noisy
Replies: 6
Views: 5390

Re: Power supply fan extremely noisy

I recently bought the Double head model also and my power supply is also very noisy. Initially the Fan was noisy sounding like the blade was hitting something. Eventually that stopped. Now the PS makes a whining noise that varies in loudness depending on what the printer is doing... heating up, con...
by Sherry
Tue Aug 04, 2015 5:28 pm
Forum: Assembly
Topic: Prusa I3 Pro B
Replies: 6
Views: 5154

Re: Prusa I3 Pro B

Warfey wrote:Im beyond that point. Im talking about the screw locking ring, part 19 in the booklet that came with the printer.
is this part?yeah,it has a set screw,it is matched with screw locking ring.it has been assembe well before leaving factory.please check whether it drop out.
by Sherry
Tue Aug 04, 2015 5:19 pm
Forum: Firmware
Topic: Firmware request GT2560
Replies: 27
Views: 19343

Re: Firmware request GT2560

afanez wrote:The model printer is the Geeetech Prusa I3 X 3D printer with a single extruder - The main board is the white GT2560 board
hi,i'v sent it to your mailbox.
by Sherry
Tue Aug 04, 2015 3:16 pm
Forum: Others
Topic: i need help with Heatbed MK2a
Replies: 23
Views: 11138

Re: i need help with Heatbed MK2a

hi,this is a wrong way .please measure it as the picture shows.
by Sherry
Tue Aug 04, 2015 2:49 pm
Forum: Firmware
Topic: Nozzles crashing into bed when homed
Replies: 8
Views: 5035

Re: Nozzles crashing into bed when homed

One more note about the firmware burning process, the sketch would not compile in Arduino IDE unless the Time library was installed and added to the project. If the Time library is added, the sketch compiles and I am able to upload to the board. you can try to modify the firmware. 1.please open con...
by Sherry
Tue Aug 04, 2015 2:08 pm
Forum: Stepper Motor
Topic: X & Y moving only in 1 direction. Z axis no movement at all
Replies: 6
Views: 5218

Re: X & Y moving only in 1 direction. Z axis no movement at

LCD doesn't show error. It resets itself after I auto-home then try and move the Z axis. hello,regarding to z axis movement,please check the sub step below a49988.all they should be turn on(or plug in jumpper caps). and could you tell me where did you get the firmware. and i have send the firmware ...
by Sherry
Tue Aug 04, 2015 1:37 pm
Forum: Firmware
Topic: Need copy of latest firmware for 3D printer with RAMPS 1.4 b
Replies: 3
Views: 2463

Re: Need copy of latest firmware for 3D printer with RAMPS 1

hi,please tell me yout printer type.
by Sherry
Tue Aug 04, 2015 11:55 am
Forum: Firmware
Topic: Nozzles crashing into bed when homed
Replies: 8
Views: 5035

Re: Nozzles crashing into bed when homed

moriartynz wrote:Hello, Thanks for the reply.
The set up is exactly as you have shown. The endstops are correctly set up. They are not being used as the printer is crashing down to the bed, not heading up to the X, Y, Z endstops.
how about reburn the G2S firmware?
by Sherry
Tue Aug 04, 2015 11:49 am
Forum: Firmware
Topic: G29 Auto-leveling
Replies: 11
Views: 9894

Re: G29 Auto-leveling

bkbot wrote:Hi, yes, i have home Z set to max.

When I run G29, the Z axis stops and the head tries to go outside the boundaries.
It seems like the firmware calculations are wrong.

Please send the latest firmware.
hi,i'v sent it to your mailbox.