Search found 71 matches

by ric chin
Tue Jun 23, 2015 6:12 pm
Forum: Extruder
Topic: Extruder Motors not Turning
Replies: 6
Views: 3604

Re: Extruder Motors not Turning

I have the same issue...except I went even further and took the pinch roller assembly apart and ran the test program provided by the tech and marked the position of the motors...ran the test program and monitored it...the motors did not turn once...so its the board...or firmware.. I would like some ...
by ric chin
Tue Jun 23, 2015 5:07 pm
Forum: Feedback&Suggestion
Topic: replacement extruder head for Prusa I3 Pro C
Replies: 6
Views: 4727

replacement extruder head for Prusa I3 Pro C

I'm not sure what I need...but will be a replacement pair of extruder heads and as well as the GT2560 board with motor drivers ...since the ones you sold me don't work...i'm not sure of the practice of using plastic guide tubes that can melt... any way I will call the credit card company and let the...
by ric chin
Tue Jun 23, 2015 4:43 pm
Forum: Extruder
Topic: Extruder motor d'ont work, please help me!
Replies: 33
Views: 17147

extruder motors do not work...and why the plastic guide tube

Well I took the extruders apart..removed the pinch roller and nozzle assembly. they where blocked by the plastic guide tube that had completely melted inside the heat tube...what the hell?...removed that..and cleared the tube...why do you have that "plastic" guide tube in a heating device... did the...
by ric chin
Tue Jun 23, 2015 11:30 am
Forum: Extruder
Topic: Extruder motor d'ont work, please help me!
Replies: 33
Views: 17147

Re: Extruder motor d'ont work, please help me!

Thank you for all your help...there are many steps to go through to correct these issues...this is a new industry ...still, i thought i waited long enough...i will try to stifle my frustrations and carry out the recommendations...
by ric chin
Tue Jun 23, 2015 11:16 am
Forum: Products FAQ
Topic: Geeetech i3 Prusa Dual Extruder
Replies: 8
Views: 6768

Re: Geeetech i3 Prusa Dual Extruder

It would be nice if they would post a definitive working set of settings for the current version of the software they are recommending, specific to each irritation of machine...maybe even provided a downloadable test, G-code program, that runs through the features..and prints something...but thats p...
by ric chin
Tue Jun 23, 2015 11:10 am
Forum: Extruder
Topic: How to start Geeetech I3 Pro C in Repetier-Host
Replies: 4
Views: 16731

Re: How to start Geeetech I3 Pro C in Repetier-Host

the software show is not even close to the current version available for the mac...can you up date your instructions for the current version.
by ric chin
Tue Jun 23, 2015 3:53 am
Forum: Extruder
Topic: Extruder motor d'ont work, please help me!
Replies: 33
Views: 17147

Re: Extruder motor d'ont work, please help me!

I had to Switch to Cura software...the heating of the ailment actually happens...but then there is a problem where a max temp error occurs... I have not seen the machine move yet... with any ones soft ware Repieter software won't even talk to it other than connect..but does nothing. you run the G-co...
by ric chin
Tue Jun 23, 2015 3:51 am
Forum: Extruder
Topic: Extruder motor d'ont work, please help me!
Replies: 33
Views: 17147

Re: Extruder motor d'ont work, please help me!

I had to Switch to Cura software...the heating of the ailment actually happens...but then there is a problem where a max temp error occurs... I have not seen the machine move yet... with any ones soft ware Repieter software won't even talk to it other than connect..but does nothing. you run the G-co...
by ric chin
Mon Jun 22, 2015 2:02 pm
Forum: Extruder
Topic: Extruder motor d'ont work, please help me!
Replies: 33
Views: 17147

Re: Extruder motor d'ont work, please help me!

I have just received a Prusa I3 pro c...purchased 2015-6-17, from shenzhen getech co...contact Jerry...assembly went well except for 2 unthreaded wing nuts and a screw that was to short for the x axis belt adjuster.. all motor test went well filament heater works ...but no feed... tried all the topi...
by ric chin
Mon Jun 22, 2015 1:42 pm
Forum: Extruder
Topic: Extruder motor d'ont work, please help me!
Replies: 33
Views: 17147

Re: Extruder motor d'ont work, please help me!

I have just received a Prusa I3 pro c...assembly went well except for 2 unthreaded wing nuts and a screw that was to short for the x axis belt adjuster.. all motor tes wet well filament heater works ...but no feed... tried all the topics mentioned here ... I haven't adjusted the voltage, or got a fi...