Geeetech

it seems your nozzle hit the bad, have you checked ?

Hi, I've the same problem. About the line printed at the start of each print work it's easy to remove but you should not do this, nevertheless you can accellerate that line by modify this setting in cura slicer: G1 F300 X200 E40 ; push 40 mm of filament while moving at 300 mm/min to position X=200 I...

Cura slicer works well with my Geetech. I've noticed that A20 bypass the temperature set point that I had set in Cura slicer. I've the last firmware on. Do you have any advice ?

Can you give me your mail ? I could send you my setting for cura

I strongly suggest to you don't remove the original hotend. How many hours/years do u have that one ? You can clean it with the original tool provided by geeetech

here How I adjust the first layer problem: 1- try to print a line pattern in order to have enough time to adjust the z-offset 2- when printing a line, you can see the hot end far away from bed 3- in control setting try the z babystep ( I thing it's the right name ) in order to adjust the z-offset du...

You should buy a geetech autolevelling sensor as soon as possibile in order to avoid levelling problem, be sure to update your printer after the installation on BL 3d touch. Let me know

Hi guys, any solution?

After I ve installed the 3d touch auto bed levelling when the a20 perform auto bed levelling it hits the right side of y axis in the 3rd levelling point. Ive got mad. Any advice?

Update
Solved by Update the firmware

Based on my experience with 3d bl touch made by geetech: 1- follow this procedure till you get the same firmwar showed on youtube link: https://www.youtube.com/watch?v=NVi_Ba-aF0U&ab_channel=Geeetech 2- in order to save setting about the auto bed levelling you have to get rid of geetech a20 software...

Help me to get your problem, do you have an auto bed levelling sensor or do you procede in manual mode ?