Search found 17 matches
- Tue Sep 01, 2020 7:51 pm
- Forum: A10T
- Topic: Fluctuating nozzle temperature and MINTEMP Error
- Replies: 5
- Views: 20625
Re: Fluctuating nozzle temperature and MINTEMP Error
Hi, since a few days I have the same problem. Fluctuating temperatures and MINTEMP errors. when i move the hotend slowly by hand I can see the temperature change to -14°C (yes MINUS). And the DL Touch is initiating when moving the hotend. I Think my problems are shaky contacts. Is there any way to g...
- Thu Jun 25, 2020 8:08 pm
- Forum: A10T
- Topic: Broken feeder
- Replies: 4
- Views: 17575
Re: Broken feeder
Hi,
sorry for late reply, did not notice you answered the topic.
I got the feeders from amazon.
https://www.amazon.de/gp/product/B07WV6 ... UTF8&psc=1
sorry for late reply, did not notice you answered the topic.
I got the feeders from amazon.
https://www.amazon.de/gp/product/B07WV6 ... UTF8&psc=1
- Thu Mar 12, 2020 11:24 pm
- Forum: A10T
- Topic: Broken feeder
- Replies: 4
- Views: 17575
Re: Broken feeder
The strange thing is, only feeder #1 was broken.
Feeder #2 and #3 were different build. They are more solid.
Feeder #2 and #3 were different build. They are more solid.
- Thu Mar 12, 2020 11:19 pm
- Forum: A10T
- Topic: Flashing firmware A10T
- Replies: 10
- Views: 35595
- Wed Mar 11, 2020 4:24 pm
- Forum: A10T
- Topic: Broken feeder
- Replies: 4
- Views: 17575
Broken feeder
I experienced some problems with feeder.
While changing the feeder I found the cause.
The feeder was broken, If somebody expierence poor extraction check the feeder!
Now I use aluminium dual extruder, they are working much better.
While changing the feeder I found the cause.
The feeder was broken, If somebody expierence poor extraction check the feeder!
Now I use aluminium dual extruder, they are working much better.
- Wed Mar 11, 2020 4:15 pm
- Forum: A10T
- Topic: Flashing firmware A10T
- Replies: 10
- Views: 35595
Re: Flashing firmware A10T
After changing the feeder I need to reverse their direction. I found the place in the firmware and build the .hex file. But now I am again not able to flash, even holding / pressing the reset button in different ways will not work now. After 2 hours holding and pressing the button I gave up. I tried...
- Wed Dec 18, 2019 10:31 pm
- Forum: Update Announcement/Product Release
- Topic: About the three-color color mixing method of Color Mix
- Replies: 5
- Views: 32138
Re: About the three-color color mixing method of Color Mix
Every time I click on "mix color" the programm crashes without errormessage.
tried on twi systems
Win 10 1909 x64
gcode generated with Cury 4.4.0
tried on twi systems
Win 10 1909 x64
gcode generated with Cury 4.4.0
- Mon Dec 16, 2019 3:38 pm
- Forum: A10T
- Topic: A10T profile
- Replies: 25
- Views: 34680
Re: A10T profile
at least, if there is change, it is not big enough.
The nozzle hits the tower and moves the bed in the wrong direction.
The more colorchanges in the print, the more the nozzles moves the bed. There aer then 3 colors on one layer in the tower.
The nozzle hits the tower and moves the bed in the wrong direction.
The more colorchanges in the print, the more the nozzles moves the bed. There aer then 3 colors on one layer in the tower.
- Mon Dec 16, 2019 3:20 pm
- Forum: A10T
- Topic: A10T profile
- Replies: 25
- Views: 34680
Re: A10T profile
Nope,
no change of size
no change of size
- Sun Dec 15, 2019 9:32 pm
- Forum: A10T
- Topic: A10T profile
- Replies: 25
- Views: 34680
Re: A10T profile
Sorry, I can see in the settings of curaengine slicer (NOT CURA itself!) the possibility to change these pameters.
Only
Only