HI
I m looking for Vref 1.2V not work
I give you more information to help me:
Drver A4988 with R200
Motor 42SHD0217-24F at current ratted 1.5 A
.
the vref is:
vref = 8 x 1.5 x 0.200
or
Vref= 8 x 1.5 x0.068
.
regards
Search found 11 matches
- Sun Mar 22, 2020 10:23 pm
- Forum: Geeetech MeCreator2
- Topic: Y printing offset problem
- Replies: 5
- Views: 18795
- Thu Mar 19, 2020 2:26 am
- Forum: Geeetech Delta Series
- Topic: erreur de placement
- Replies: 2
- Views: 29584
Re: erreur de placement
Salut
as tu bien mis et coché, dans ta gestion d'imprimante:
ORIGINE AU CENTRE
(au dessus de plateau chauffant)
cdlt
as tu bien mis et coché, dans ta gestion d'imprimante:
ORIGINE AU CENTRE
(au dessus de plateau chauffant)
cdlt
- Wed Mar 18, 2020 6:39 pm
- Forum: Geeetech MeCreator2
- Topic: Y printing offset problem
- Replies: 5
- Views: 18795
Re: Y printing offset problem
Hi William, thanks for support... I swap the stepper on mother board, but same problem. I try to swap motor, (Pulley, screw), but power and rear fixing are not same. At start the rotation was reverse, big worries. Then I try to find a new motor , (this printer was a reconditioned) It work fine, but ...
- Tue Mar 17, 2020 9:26 pm
- Forum: Geeetech MeCreator2
- Topic: Y printing offset problem
- Replies: 5
- Views: 18795
Re: Y printing offset problem
Thanks
I set at 1 Volts motors, but only the Y not work...
Is it possible was down?
date on motor 27/02/2017
Is there to sold on store? because he have different fixing.
regards
I set at 1 Volts motors, but only the Y not work...
Is it possible was down?
date on motor 27/02/2017
Is there to sold on store? because he have different fixing.
regards
- Tue Mar 17, 2020 12:33 am
- Forum: Geeetech MeCreator2
- Topic: Y printing offset problem
- Replies: 5
- Views: 18795
Y printing offset problem
Good morning all
I have a problem on the Y axis.
printing is shifting!
no hard point, at the belts, pulleys ...
I think it's at the level of electronics.
I adjusted the four motors which were often hot at 1,2V, beetwen screw and ground
Is it correct??? for all motors?
thanks
I have a problem on the Y axis.
printing is shifting!
no hard point, at the belts, pulleys ...
I think it's at the level of electronics.
I adjusted the four motors which were often hot at 1,2V, beetwen screw and ground
Is it correct??? for all motors?
thanks
- Sun Feb 09, 2020 7:51 pm
- Forum: Geeetech MeCreator2
- Topic: Upgrade tl-smoother ?
- Replies: 1
- Views: 14542
Re: Upgrade tl-smoother ?
thanks you for your info return..
Wath 's "trinamic drivers"?
And reference of it , please
Wath 's "trinamic drivers"?
And reference of it , please
- Sat Feb 08, 2020 10:07 pm
- Forum: Geeetech MeCreator2
- Topic: Upgrade tl-smoother ?
- Replies: 1
- Views: 14542
Upgrade tl-smoother ?
Hi Group
Is it a good idea to install tl-smoother? (or not necessary on Geeetech printer)?
should i equip the 4 motors, (Axes + extruder) or only 3 Axes?
Geeetech store sell it?
thanks
regards
Is it a good idea to install tl-smoother? (or not necessary on Geeetech printer)?
should i equip the 4 motors, (Axes + extruder) or only 3 Axes?
Geeetech store sell it?
thanks
regards
- Sun Sep 29, 2019 4:25 pm
- Forum: Geeetech MeCreator2
- Topic: Mecreator 2
- Replies: 15
- Views: 54201
Re: Mecreator 2
Hi
and who and why firmware use?
1- MeCreator2固件.zip
(293.54 KiB) Downloaded 5250 time
Update:new version of mecreator2
(fixed the print area not correct)
2 - MeCreator2-1.0.4.zip
(305.39 KiB) Downloaded 1211 times
3 - MeCreator2_G03 (hex)
thanks
and who and why firmware use?
1- MeCreator2固件.zip
(293.54 KiB) Downloaded 5250 time
Update:new version of mecreator2
(fixed the print area not correct)
2 - MeCreator2-1.0.4.zip
(305.39 KiB) Downloaded 1211 times
3 - MeCreator2_G03 (hex)
thanks
- Sun Sep 29, 2019 3:51 pm
- Forum: Geeetech MeCreator2
- Topic: Mecreator 2
- Replies: 15
- Views: 54201
Re: Mecreator 2
Hi William I use CURA and I update with the HEX firmware for my MC2. Because i See it s last date firmware. What is the difference or the good on forum firwamre: MeCreator2固件.zip (293.54 KiB) Downloaded 5250 times Update:new version of mecreator2 (fixed the print area not correct) MeCreator2-1.0.4.z...
- Thu May 30, 2019 12:46 pm
- Forum: Geeetech MeCreator2
- Topic: Start and End Gcode
- Replies: 2
- Views: 7181
Re: Start and End Gcode
Thanks for you reponse
I think after printing is finish you can siwtch off the printer automaticly...
And on LCD they re a " switch power off " option, what is it ?
regards
I think after printing is finish you can siwtch off the printer automaticly...
And on LCD they re a " switch power off " option, what is it ?
regards