Put a tiny spring into hotend tip (yes, inside!) to mix filament more better.
Pitfalls:
- lower volumetric speed
- another retract or totally bad, depend on your spring.
Search found 189 matches
- Sun Jul 05, 2020 8:23 am
- Forum: Geeetech A10 Series
- Topic: A10M 2 filament not mixing well
- Replies: 14
- Views: 14452
- Sun Jul 05, 2020 8:09 am
- Forum: Geeetech A10 Series
- Topic: Downgrade from A10t to A10
- Replies: 1
- Views: 2813
Re: Downgrade from A10t to A10
Yes, but why?
- Sun Jul 05, 2020 8:04 am
- Forum: A20T
- Topic: Magnetic Hotbed
- Replies: 9
- Views: 18741
Re: Magnetic Hotbed
Use Geeetech SuperPlate and you will get out all problems with sticking.
- Sun Jul 05, 2020 7:51 am
- Forum: Geeetech A20M
- Topic: Incomplete upper surface
- Replies: 1
- Views: 2993
Re: Incomplete upper surface
Try my profile, you can use it without changes but hotbed is smaller as A10M have it.
- Sun Jul 05, 2020 7:44 am
- Forum: Geeetech A20M
- Topic: New A20M couple of problems?
- Replies: 1
- Views: 3202
Re: New A20M couple of problems?
It could be cable problem. Contact oxidation is one of known shipping problems with Geeetech.
- Sat Feb 01, 2020 4:42 am
- Forum: Geeetech A10 Series
- Topic: Leveling bed with glass platform
- Replies: 2
- Views: 3719
Re: Leveling bed with glass platform
use screw dials on hotbed. Or push Z switch slightly higher, but not reccomend 5mm but 3-4mm only, adjust via bed then.
- Sat Feb 01, 2020 4:37 am
- Forum: Geeetech A20M
- Topic: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
- Replies: 5
- Views: 7933
Re: FAQ--All you must know about 3DWiFi/Easyprint/Firmware -> Outdated
Is it possible to update firmware in 3D wifi to be octoprint compatible?
For inspiration see
https://github.com/ipepe/espruinto
https://github.com/probonopd/WirelessPrinting
https://github.com/luc-github/ESP3D-WEBUI
https://github.com/LitvinovDmitry/EspPrinterControl
and others similar projects
For inspiration see
https://github.com/ipepe/espruinto
https://github.com/probonopd/WirelessPrinting
https://github.com/luc-github/ESP3D-WEBUI
https://github.com/LitvinovDmitry/EspPrinterControl
and others similar projects
- Tue Jan 21, 2020 7:53 am
- Forum: A30M
- Topic: Purge Bucket for A30m?
- Replies: 1
- Views: 4423
- Tue Jan 21, 2020 7:44 am
- Forum: A30M
- Topic: A30M Poor Colour Mixing
- Replies: 2
- Views: 4600
Re: A30M Poor Colour Mixing
Black need lower temp, white higher. But mixing is possible. Stringing is terrible.... The mixing coulours what you find is FEATURE of mixer hotend. Solution to have smooth colours is possible (look at my messages here, described few weeks ago), but chinese sellers sell me steel nozzles instead of b...
- Tue Jan 21, 2020 7:36 am
- Forum: A30M
- Topic: TPU not Working with A30M
- Replies: 5
- Views: 7245
Re: TPU not Working with A30M
Suitable, but with very low volumetric speed. And possible you need to lubricate filament (use drop of gun oil to filament filter).