Search found 12 matches

by pwwhdr70
Sun Mar 06, 2022 9:26 am
Forum: A30 PRO
Topic: E-step Decimals?
Replies: 0
Views: 3887

E-step Decimals?

On the touch screen is there a way to change the decimal value on Steps/mm? I can only enter whole numbers.
by pwwhdr70
Thu Apr 22, 2021 10:00 pm
Forum: A30 PRO
Topic: Help! I Think Something Blew!
Replies: 0
Views: 4055

Help! I Think Something Blew!

I just got my brand new A30 Pro put together and was following the video on how to install the 3DTouch 3.2. I plugged in the Brown/Red/Orange wire just like the video with brown on top and I heard something sizzle and pop. I'm not sure where it came from, but there was no smoke and no smell I could ...
by pwwhdr70
Sat May 18, 2019 6:45 pm
Forum: Geeetech I3 Pro B
Topic: 3DTouch Z Offset Not Changing In LCD Menu
Replies: 8
Views: 12981

Re: 3DTouch Z Offset Not Changing In LCD Menu

BR365 wrote:
Sat May 18, 2019 4:12 pm
The nozzle will be above the hotbed. Now, you estimate or measure the distance to the hotbed and put this value as negative value into the Z-Offset.
I tried this, but if I change the Z-Offset in the LCD panel it only goes down to 0.5. It won't let me go into negative numbers.
by pwwhdr70
Sat May 18, 2019 7:21 am
Forum: Geeetech I3 Pro B
Topic: 3DTouch Z Offset Not Changing In LCD Menu
Replies: 8
Views: 12981

Re: 3DTouch Z Offset Not Changing In LCD Menu

Why don't you use the display. Worked perfect here. I'm using the instructions recommended by Geeetech, which uses both Gcodes and the display to calibrate. They worked perfectly for me when I first installed the 3DTouch 6 months ago. The only thing I've changed since then is the hotend, which has ...
by pwwhdr70
Sat May 18, 2019 5:39 am
Forum: Geeetech I3 Pro B
Topic: 3DTouch Z Offset Not Changing In LCD Menu
Replies: 8
Views: 12981

Re: 3DTouch Z Offset Not Changing In LCD Menu

Hi, if your changes need to be submitted to the EEPROM or configuration.h file to make them permanent. To save to EEPROM, use: M500 Every time I do that, Repetier says, "Settings Stored." Then it uses the old settings anyway. I've downloaded and replaced the firmware three times now. I even tried o...
by pwwhdr70
Fri May 17, 2019 6:20 am
Forum: Geeetech I3 Pro B
Topic: 3DTouch Z Offset Not Changing In LCD Menu
Replies: 8
Views: 12981

3DTouch Z Offset Not Changing In LCD Menu

I am unable to calibrate my Z-axis Every time I enter Gcode G1 Z0 it pushes the nozzle into the glass. And the when I enter M851 Zxxx, the Z offset on the LCD display is still the old one from before I swapped out hotends. I can't change it even though EEPROM is enabled. This is a new hotend with a ...
by pwwhdr70
Thu May 16, 2019 1:59 pm
Forum: Others
Topic: Homing Problem
Replies: 3
Views: 10270

Re: Homing Problem

I found the problem. For some reason, my EEPROM settings had the Homing Offset WAYYYY off. I corrected for that and now the nozzle is perfectly centered. BUT... Now I can't calibrate my Z-axis. Every time I enter Gcode G1 Z0 it pushes the nozzle into the glass. And the Z offset on the LCD display is...
by pwwhdr70
Thu May 16, 2019 10:17 am
Forum: Others
Topic: Homing Problem
Replies: 3
Views: 10270

Re: Homing Problem

No, I've been looking online for a solution. Everything leads me to solutions to the nozzle height problem, or something else. I've found nothing related to my specific issue.
by pwwhdr70
Thu May 16, 2019 6:41 am
Forum: Others
Topic: Homing Problem
Replies: 3
Views: 10270

Homing Problem

I recently installed my 3DTouch and it seems to work well. All the self tests work perfectly. However, when I press home on Repetier, it goes like this: X-axis - OK Y-axis - OK Z-axis - flies past center, straight to back-right of bed and grinds the belt The image shows about where it starts grindin...
by pwwhdr70
Sun Feb 03, 2019 2:44 pm
Forum: Geeetech I3 Pro B
Topic: Z Axis Stopped Working After 3DTouch Installed
Replies: 4
Views: 4956

Re: Z Axis Stopped Working After 3DTouch Installed

I think I found the problem. I was initially focused on possible loose connections to the stepper motors and kept going in circles because nothing looked out of place. But then I noticed that the 2-wires that connect to the Z-MIN plug were loose. They were making intermittent connection with the pin...