Search found 6 matches

by bertie
Wed Sep 11, 2019 5:42 pm
Forum: Geeetech I3 Pro W
Topic: Z axis too high with 3D Touch
Replies: 6
Views: 995

Re: Z axis too high with 3D Touch

Hej,

I adjusted the Firmware Settings, now everything is working fine. Thank you!
by bertie
Tue Sep 10, 2019 1:10 am
Forum: Geeetech I3 Pro W
Topic: Z axis too high with 3D Touch
Replies: 6
Views: 995

Re: Z axis too high with 3D Touch

Hej, that helped a lot, setting min_software_endstops to false was good. But now the Z axis during bed levelling is going in wrong direction in the first Corner. It is just going up a but so that the probe cannot touch the bed, then it goes in the second Corner and from that Point on it is doing it ...
by bertie
Mon Sep 09, 2019 4:03 pm
Forum: Geeetech I3 Pro W
Topic: Z axis too high with 3D Touch
Replies: 6
Views: 995

Re: Z axis too high with 3D Touch

Hej, thank you for the hint. I tried to calibrate like mentionend in the wiki with M851 ; note the number M851 Z0 ; set the offset to zero G28 G1 Z0 The LCD display should show Z = 0 From the display go to the Menu then Prepare/Move axis/0.1mm/Move Z Now move the Z axis slowly down until the nozzle ...
by bertie
Sun Sep 08, 2019 7:29 pm
Forum: Geeetech I3 Pro W
Topic: Z axis too high with 3D Touch
Replies: 6
Views: 995

Z axis too high with 3D Touch

Hej, I just installed the 3D Touch on My I3 Pro W with selve printed mount from instruction, installed the Firmware from this Forum for this and added Code G29 in Cura for My prints. I can see that the Printer is doing the autolevelling, but the result in Z axis is just a few Millimeter too high, th...
by bertie
Sat Dec 29, 2018 3:03 pm
Forum: Software
Topic: Easyprint software for WINDOWS
Replies: 45
Views: 133307

Re: Easyprint software for WINDOWS

I solved it by manually downloading and installing Visual C++ Redistributable 2015 (X86 + X64) from Microsofts website and reinstalling EasyPrint. Installing C++ via EasyPrint installer did not work for me and on my machine was only version 2017 instead of 2015.
by bertie
Fri Dec 28, 2018 12:51 am
Forum: Software
Topic: Easyprint software for WINDOWS
Replies: 45
Views: 133307

Re: Easyprint software for WINDOWS

Hi all, i have just installed Easyprint 1.2.6 to on a laptop with win 10 Enterprise easyprint-1.png When I load an stl model and press the button Slicer the program complains with this message: easyprint-2.png Any idea how to fix this error? Best regards. I have the same Problem (win 10, Easyprint ...