Search found 1 match
- Sat Jul 14, 2018 6:30 pm
- Forum: Discuss & Help
- Topic: Z-Axis moving too far
- Replies: 13
- Views: 33028
Re: Z-Axis moving too far
I'm also having this problem. I have reflashed the board firmware but no change. The Z axis is out by a factor of 10. Eg 1 mm of commanded move gives 10mm movement. Steppers are set at Z=2560 My print starts 3.5 mm away from the bed If your screw thread is with trapezoidal thread rather than triang...