Geeetech

Where is the video? It says its been removed By user.

https://www.thingiverse.com/thing:4049225

If you have any questions feel free to PM me on Facebook: Akos Wonerth

Yes I did the upgrade for all my A printers.

The same here. Upload the slicing details, or simply the gcode wich you are trying to print. I can run it on my printer(wich is the same as yours) and then we can start with the troubleshooting). Send the *.gcode file so that we can simply exclude slicing problems. Does the extruder clicks when ther...

By pressing down...the scale will be set to 0->object gone.
Have you tried “0.9” instead of “0,9” ?

Hi Peter, Also check out the next troubleshooting guide on the Simplify3D website: https://www.simplify3d.com/support/print-quality-troubleshooting/#grinding-filament https://www.simplify3d.com/support/print-quality-troubleshooting/#clogged-extruder https://www.simplify3d.com/support/print-quality-t...

I don’t know exactly what could your problem be, but it sounds like a multiple problem. The filament grinding/clicks from the extruder it can be a clogged nozzle, or the filament/hotend is cooling down. You forgot to mention what exactly are you printing? PLA or ABS or PETG? This sounds like ABS bec...

The mosfet is probably very hot because the big current, or the unstable Power supply. I didn’t figured it out. I am using without the heated bed as I am using only PLA. I am thinking adding a better quality Mosfet, or a bigger Power supply, as the 15A power supply that came in the Kit it is on it l...

Hi, I am using Marlin 1.1.4 with BL-Touch from this post: https://www.geeetech.com/forum/viewtopic.php?f=20&t=19846 I needed to change the X direction Inverse. But everything works fine. Now I have seen that there is also a 1.1.7 firmware, but I didn’t tested it. Here is the link: http://www.geeetec...

Have you solved this issue? Is it an issue? I am also worried/ thinking of buying another separate mosfet? Mine is also getting very very hot(can’t hold my finger on it not even 1sec) but everything is working fine. Printing great. Hotbed is warming and keeping the temperature 60° for PLA. Is this a...