Geeetech

The rods are made of tempered steel. Burring or grinding the rod ends can be difficult and can damage the rods. If I had a driller I would drill through the locking ring to make it few mil larger.

Printing from SD Card Solved. Follow the following steps to print from an SD card. 1. Format the card to FAT32 not NTFS. 2. Copy slicer file on to the card from Repetier. When you slice the STL file in Repetier, it will show the option to copy to the SD-CARD. It is important to copy the file from R...

Send an email to Geeetech to send firmware file. They will send you a folder containing all the files you need to install the firmware "Marlin-PI3_Pro_B". Do not change anything in the firmware files. There is also marlin firmware on the GitHub. I will not use it as it needs lot of tweaking and may ...

I had similar problems. Use Geedtech firmware file. Use it without modifications. Do not use GitHub marlin file. It needs lot of tweeking and may not work.

I am having a problem of stand alone printing using SD card. Has anybody had success? The LCD panel recognises the sd-card insertion but it cannot read the gcode files. Message on the LCD panel displays "not files found".

Has anyone tried to upgrade MK8 extruder/hotend on Geeetech prusa i3 prob B to E3D hotend with direct or Bowden external extruder?

I had similar problem. I installed new version of firmware. Then everything worked OK.

Solved. The stop end micro switch has to be plugged into "Z-Min".

I have recently purchase and assembled Geeetech i3 pro B 3d printer (2017 version). X and Y endstops controlled by microswitches work OK. When X endstop microswitch is pressed x axis motor stops and similarly Y microswitch. But when I press Z microswitch the Z axis motor does not stop. Also, When au...

Hi I had similar problem with other problems. When I installed the firmware every thing worked ok. If you want to install Firmware for your printer please follow the instruction as directed by Geeetech step by step. You must use their firmware and not from GitHub. The GitHub firmware requires lot of...