Geeetech

I will gladly accept and document fully

This is what I sent to zina.luo@geeetech.cn I would like to get a spare motherboard for my M301 . I have left several requests with sales and tech support and I have not received any responses . I just want to know what part # to order and how much it is . The motherboard is not listed on Geeetech.c...

Can I buy a GTM32 Pro board. It is not listed on web page .

I would like to get a spare motherboard for my M301 . I have left several requests with sales and tech support and I have not received any responses . I just want to know what part # to order and how much it is . The motherboard is not listed on Geeetech.com web page

Hi Toy I measured insertion depth with tool supplied to clear clogs ,74.32 mm so I marked bowden tubes to 74.32 mm and inserted to the bottom and double checked the marks . I've done this several times on both of the hot ends ( the original and the one I bought from Geeetech ) Please advise

Thanks William for your responses , I can not get this M301 to print with the 3 color hotend! I have tried 2 degree increments from 200 C to 260 C I bought a complete 2nd extruder right from Geeetech I have tried stepper currents from .5v to 1.1v measured on the poteniometer to ground . I bought Gee...

Where do I find definition / purpose of all the "Delta" settings ex; diagonal rods , smooth offset , effector offset, carriage offset, Delta radius,

Hello, Where can I find explanations on what the " Delta " settings on my 301 do and how to set them . I am having a bad time trying to calibrate . The 1st layer is either too thin or too high to stick , it is very uneven from center to edges. It is also inconsistent , I get 1 decent print then the ...

This is the link I think is for my machine http://www.geeetech.com/forum/download/file.php?id=2495

It downloads but I can't open it
My Geeetech Me Creator opens to Arduino IDE and I can see Marlin and work with it. This does not open to anything.?