Geeetech

Filament Guide.jpg Designed by Robert Martin aka nukem , this is a small but functional print designed for the Geeetech Acrylic Spool Holder. Once tapped using a 1/8th inch BSP-PL (parallel) tap, you can install the 1/8th inch BSP fittings for either 1.75mm or 3mm filaments. Shown in the above imag...

And one last thing should be pointed out. Telling me as others have from Geeetech that the control boards are almost the same like that makes things right or is meant as a consoling effect to passify the issue at had or alleviate Geeetech from the responsibility of correcting the issue by sending th...

And it should be stated here William, I'm not the only person with these complaints of missing parts or incorrect parts in Geeetech printer kits. Nor an I the only one complaining Geeetech isn't handling issues in a professional let alone timely manner. Geeetech does business around the world. There...

William, I stated I bought a Geeetech i3 Pro B (2015 version) because Geeetech upgraded the i3 Pro B one (1) after I bought this one. The update from the 2015 which I refer to mine as to the 2016 was on July 9th 2016. I've stated that fact in my posts as well. The GT2560 revA was included in kits pa...

Sorry for the much delayed response William. I changed my email address in my profile which auto deactivated my account. I had no way to get a hold of a forum Admin not being able to log in. No one has responded in over a month from Geeetech. Not tech support. Or anyone else for that matter to help ...

Hey William, First I want to reiterate, not having an instant post or edit ability in the forums really sucks... and here's a perfect example of why. After some further searching, I can see the second image of the GT2560 I posted and asked a question on, is not a revision B but rather the original G...

Hey William, Thanks for the reply. Just so I understand, you can only use a 12v heat bed with the GT2560B control board. I want to upgrade my heat bed, I'd like to take full advantage of the new ones. Like the MK42 dual sided thicker heat bed. And possibly some others I'm looking at. This animated g...

Hi, Can I use a Dual voltage [12/24v] Heat Bed with my GT2560 vB control board? Secondly, it was mentioned in another post that the Y cable for the Z Stepper Motors was not needed on the new control board since on the new board there are two connections/plugs for the Z motors on the board. (I'm not ...

Hi,

What is the Stepper Angle of the Stepper Motors included with the Acrylic I3 Pro B? (2015 edition/printed carriers)

tia,
- chase -

Sorry guys/gals, it seems I jumped the gun and instant posts are only in the Mod section. At least for a post I made yesterday.

I don't know off that's a fluke, a temp thing or permanent thing...

But at least there's a Mod and Hack section now!

- chase -