Search found 10 matches

by FluksikartoN
Thu Feb 25, 2016 8:46 pm
Forum: Others
Topic: Geeetech Pursa i3 X Pro Y axis freaks out and doing nonsense
Replies: 5
Views: 8772

Re: Geeetech Pursa i3 X Pro Y axis freaks out and doing nons

Ill check this definetly thanks for now
by FluksikartoN
Thu Feb 25, 2016 12:08 am
Forum: Others
Topic: Geeetech Pursa i3 X Pro Y axis freaks out and doing nonsense
Replies: 5
Views: 8772

Geeetech Pursa i3 X Pro Y axis freaks out and doing nonsense

i have fixed everything excep that the Y axis freaks somewhere between 1-2minutes after printing Ill seld you a video to see what im talking about. On video I start printing 20mmx20x20mm cube and suddenly it started to print something that is not a cube. So i have cilbrated everything except that in...
by FluksikartoN
Sun Feb 21, 2016 4:54 am
Forum: Extruder
Topic: Extruder Motor blocks but its extruding
Replies: 4
Views: 6059

Re: Extruder Motor blocks but its extruding

Also the strange thing is that even with my hand to push the filament while making distance from the Motor and the Wheel with my hand i cannot push it so i think really down there is cooled
But for 10mintes at 240C it should be melted strange
by FluksikartoN
Sun Feb 21, 2016 4:49 am
Forum: Extruder
Topic: Extruder Motor blocks but its extruding
Replies: 4
Views: 6059

Re: Extruder Motor blocks but its extruding

I use Black PLA 1.75mm trying to print at 200 C now as you told me for 10 minutes im testing the extruder with 240 C so if anything is cooled downthere in the tube it should be melted and the motor should not block again but its still blocking now i see zero extrution when testing the extruder i onl...
by FluksikartoN
Fri Feb 19, 2016 11:37 pm
Forum: Extruder
Topic: Extruder Motor blocks but its extruding
Replies: 4
Views: 6059

Extruder Motor blocks but its extruding

the url of the video to see what im talking about its not very clear: http://sendvid.com/yegsv3kb So its normal that the Extuder motor is blocking somewhere but it still extrudes how to fix that what could be a problem im using Geeetech Prusa i3 X PRO http://www.geeetech.com/unassembledgeeetech-prus...
by FluksikartoN
Fri Feb 19, 2016 11:35 pm
Forum: Extruder
Topic: Problem with my Geeetech prusa i3 X PRO printer
Replies: 7
Views: 11125

Re: Problem with my Geeetech prusa i3 X PRO printer

Hello i think the bed speed freaking is done and its normal now but the extruder motor still bother me ill send you a video not very clear WHen i test he extrution the motor is extruding but its blocked somewhere and it creates blocking noise for each point of extrution in the Repetier Host url here...
by FluksikartoN
Fri Feb 19, 2016 10:19 pm
Forum: Extruder
Topic: Problem with my Geeetech prusa i3 X PRO printer
Replies: 7
Views: 11125

Re: Problem with my Geeetech prusa i3 X PRO printer

i think everything is fine the fact that it freaks out later not at the beggining of the printer means that motors/shafts/hardware things are ok except the voltage i dont know how to check it im from bulgaria and i dont know if im using 110V or 220V i think its on 220V switched on otherwise it would...
by FluksikartoN
Fri Feb 19, 2016 10:11 pm
Forum: Extruder
Topic: Problem with my Geeetech prusa i3 X PRO printer
Replies: 7
Views: 11125

Re: Problem with my Geeetech prusa i3 X PRO printer

they are allright the fact that at the begginng is fine and then it freaks out means that its not from the hardware in my opinion its something in the software except the extruder problem which im reading right now
by FluksikartoN
Fri Feb 19, 2016 9:21 pm
Forum: Extruder
Topic: Problem with my Geeetech prusa i3 X PRO printer
Replies: 7
Views: 11125

Re: Problem with my Geeetech prusa i3 X PRO printer

but in the first 2 minutes the bridges fill speed was normal and then it freaked out and sometimes it freaks out just at the beggining and the bed hit the end so i have to emergency stop
by FluksikartoN
Fri Feb 19, 2016 8:45 pm
Forum: Extruder
Topic: Problem with my Geeetech prusa i3 X PRO printer
Replies: 7
Views: 11125

Problem with my Geeetech prusa i3 X PRO printer

Basically when it was finally build the X end stop was reversed so i checked google and i have to reupload the marlin firmware. But now i have 2 strange issues : first issue is that : the extruder motor is a little bit blocking each second i mean the extruder extrudes but i can hear that the extrude...