Geeetech

Mark, Now setting these low values the printer moves. Not fine because the values are too low in some cases but the problem on the z-axis occurs only when there is normal feedrates set in the slic3r with the Repetier host (take in account that I have saved the various kind of slic3r settings. Explor...

I am supposing the same. Or a problem related to the wrong management of long / integers during compilation, wrong casting or similar. Now I am doing a counter-test: Set the slicer feed rates to almost absurd values, like 1 and 2 Then the result in the generated gcode is between acceptable ranges. I...

No matter about the slice software, I have tried with Cura sllicer from inside Repetier and there is no problem at all. Then also sending manually the specific gcode command, the effect is just focused: the parmeter F=4800 that internally of the marling firmware (marlin_main.cpp) is processed as fee...

Hi again, Mark For your information, a couple of notes. I have checked the firmware sources of the Marlin I have updated (with the right settings for the specific Aluminium Prusa i3) and I saw that in the Marling_main.cpp source the case parser of the Gcode parameters when a gcode feed rate is encou...

Hi Mark, thank you for the suggestions. I have uploaded the firmware after a in-depth check for all the parameters accordingly with the hardware features. Then I have also changed the name of the firmware. After the upload I have manually powered and set the prusa with repieter: unfortunately all re...

Hi Mark, I have already replied but maybe the text has been lost. I have checked the board (see the attached images) but to be honest, I have not found any kind of jumper on it. Anyway - also in the case there are jumpers - I am wondering why all what working then things changed ? in the meantime, a...

Hi Mark!

Thank you for your suggestion. Frankly I have not yet checked. Please can you advice me where I can find the jumper settings? In the Geetech wiki ?

Cheers, Enrico

Hello, I am experiencing a very strange problem I found very difficult to identify and debug. I bought a Geetech Prusa i3 Aluminium , directly from Geetech in China through a Chinese partner I am working with (using the sanguinololu board controller), assembled and used it to prototype projects for ...