Search found 6 matches

by piscanc
Fri Jan 22, 2016 3:54 pm
Forum: Feedback&Suggestion
Topic: gt2560 rev B - Suggestion
Replies: 3
Views: 8738

Re: gt2560 rev B - Suggestion

I would suggest moving to better connectors for board and bed. I do a lot of ABS and have already burned board power connector. Bed connector is showing signs of overheating. my recommendation would be to move to screw style connector. I have all so measured bed mosFET reaching 93°C+ when heating bed.
by piscanc
Sat Dec 05, 2015 2:13 am
Forum: Products FAQ
Topic: G2/G2S status check
Replies: 8
Views: 57388

Re: G2/G2S status check

Sorry to steal topic, you can move/delete post once noted. but Pic no.005 (spider/probe) clearly shows another problem. Loose rod end holders (connection between spider and rods). First problem here is part design one part has rounded edge, other is sharp. Lucky softer part has the sharp edge. Once ...
by piscanc
Fri Dec 04, 2015 1:20 am
Forum: Feedback&Suggestion
Topic: Pulleys on g2s pro (or PRO kit)
Replies: 2
Views: 5706

Pulleys on g2s pro (or PRO kit)

When designing part one thing was forgotten. Other side of bearings all-so has to be supported. Quick fix for production line would be to include plastic or metal washer that has to be inserted between bearings while assembling pulley. Better solution would be to move back half of step to previous s...
by piscanc
Thu Oct 15, 2015 7:45 pm
Forum: Feedback&Suggestion
Topic: suggestions for improving assembly instructions
Replies: 5
Views: 10218

Re: suggestions for improving assembly instructions

Hi, delivery of my g2s took longer than expected so i had some time to research instructions. I did find a review of device that nicely pointed out things that were wrong with instructions, but all so pointed out some design faults. But for technical person they are good enough, some spider steps sh...
by piscanc
Thu Oct 15, 2015 7:12 pm
Forum: Feedback&Suggestion
Topic: sticky topic for each device
Replies: 1
Views: 5513

sticky topic for each device

i suggest creation of sticky topic for each device you support, something like "delta G2S guide" and first post should be constantly edited with latest links for firmware, parts, mods,... post below are used for general discussion if things work or not. Cellphone community has this nicely developed....