Search found 5 matches
- Thu Sep 24, 2015 12:05 pm
- Forum: LCD Panel
- Topic: LCD 2004 Panel Only Showing Blocks
- Replies: 33
- Views: 104291
Re: LCD 2004 Panel Only Showing Blocks
Got it fixed. Compiled my Marlin1.1 code with Arduino 1.6.5 and then uploaded with AVRDUDE from 1.0.1. Everything works fine now. Just wish I could upload direct from 1.6.5 some problem with bootloader mismatches I think. Not going to worry though. Going to upgrade to a Ramps 1.4 anyway. Thanks for ...
- Wed Sep 23, 2015 6:32 am
- Forum: LCD Panel
- Topic: LCD 2004 Panel Only Showing Blocks
- Replies: 33
- Views: 104291
Re: LCD 2004 Panel Only Showing Blocks
Thanks, did that already though. Problem is that instead of the display working, the hot bed heater and it's LED start turning on and off in a 0.1 second cycle.
- Tue Sep 22, 2015 7:05 pm
- Forum: Products FAQ
- Topic: Bed Heater Flashing
- Replies: 2
- Views: 5111
Re: Bed Heater Flashing
1 - Printer works fine with display disabled. 2 - Uncomment: //#define REPRAP_DISCOUNT_SMART_CONTROLLER in configuration.h 3 - Recompile and flash the printer 4 - after upload (or reboot) the hot bed heater (and indicator LED) begins turning on and off repeatedly in a 0.1 second cycle. 5 - This will...
- Tue Sep 22, 2015 11:50 am
- Forum: Products FAQ
- Topic: Bed Heater Flashing
- Replies: 2
- Views: 5111
Bed Heater Flashing
Hello, I have an Aluminum i3 Prusa. W/ Sanguinololu 1.3a & LCD2004 . It was working fine but I wanted to 'tweek' it. Reflashed the firmware and if I enable the LCD, the bead heater starts pulsing. (everything else works but I can't enable the display, otherwise the hotbed goes nuts.) I gather this m...
- Mon Sep 21, 2015 10:17 pm
- Forum: LCD Panel
- Topic: LCD 2004 Panel Only Showing Blocks
- Replies: 33
- Views: 104291
Re: LCD 2004 Panel Only Showing Blocks
I too have a wacky display. Was fine until I updated may Sanguinololu with Marlin 1.1. Now printer is fine but display is 'blocked'. I suspect there is a problem in pins.h. Any help? I have the Aluminum Prusa i3 with the 2004 display. Maybe somebody could post the stock factory configuration files? ...