Geeetech

it was enough to change the name of the printer to solve.

yes, but I receive this error:
"ultralcd.cpp:33: error: initializer-string for array of chars is too long"

sorry if I post here, but I did not understand the instructions of homing. I figured out how to enter the height and report the value also in the firmware. Everything is right. But the three points awarded with gcode not. I ask precise instructions. If I impart the Gcode G0 X0 Y50 Z2 and after impar...

I pressed home and read the height of the extruder: 207. I reported this value in the firmware and settings Repetier host (print height). I lowered the probe and the probe centered in the plane when the probe touches the center. I wrote these coordinates and I entered so #define X_PROBE_OFFSET_FROM_...

from the list I see that I need to enter the 7 instead of 1, but by doing it I get the error that I have told you before // Languages // 1 English // 2 Polish // 3 French // 4 German // 5 Spanish // 6 Russian // 7 Italian // 8 Portuguese // 9 Finnish // 10 Chinese // 11 Aragonese #ifndef LANGUAGE_CH...

if I try to set the Language 7 (italian) with a different one I get this error message:
ultralcd.cpp:33: error: initializer-string for array of chars is too long

where I find the strings to be changed?

It of course, but nothing changes is that the probe is lowered, whether it is raised. When I press home the engines raise uninterrupted carts and I have to turn off.

But when I in Arduino I press on "upload" I send all flags or open only one on which they are placed? "Upload" change firmware? If the printer sees the endstop, but does nothing, then missing the appropriate instructions. I would try to restore ... if I knew how to do.

for a small fraction of time it had started to operate.He continues to see endstop and recognize the state triggered or open, but does not issue the correct instructions and engines continue to push despite the endstop reached by screws.

I must not deny what I said before.He has started to not work without intervention. I begin to believe that they'll never see the print. How do home? How is it that the endstop no longer work?