Search found 24 matches

by fotomickey
Thu Sep 24, 2015 12:01 am
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

Hi Mark

Please refer to my original post, The J head did melt at 210 start bubbling leak out from the joint between head and plastic bellow. It become impossible to unclogged. The manufacture J head dissamble video don't really help or mus guide in the cleaning purpose https://youtu.be/OQG97plWXl0
by fotomickey
Wed Sep 23, 2015 12:06 am
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

Hi Mark

Then you confirm J head is dead once clogged. What sort of solutions/ options left for G2 delta. ? Please advise
by fotomickey
Tue Sep 22, 2015 1:45 am
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

Hi Mark

Please verify the design , Delta used J head which has heat resistance barrel, that is nothing in common with above picture.
by fotomickey
Sat Sep 19, 2015 11:33 pm
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

Hi Mark, what about Delta Hotends, please show new video
by fotomickey
Thu Sep 17, 2015 11:38 pm
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

As mentioned on the post, I want to see how the hotends disassemble after being used, it seem there are design faluse the hotends cannot deassemble after used. is It became 1 time use hotend. Please show a new video on use hotends to enlighten me if assumed wrong

Thanks
by fotomickey
Sun Aug 30, 2015 7:22 am
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

I'll be interest to see a post video show how to disassemble Hot-head after usage too. My experience its impossible to dissemble after used (glued in). It is very frustrated process for me Thanks
by fotomickey
Thu Aug 06, 2015 11:06 pm
Forum: Extruder
Topic: G2s compatible Jhead list
Replies: 25
Views: 15860

Re: G2s compatible Jhead list

Please clarify compatible model#, as mention the both "plastic" not working. One is DOA out if box, and the other Clogged quickly after few test run. Expect to replace them with metal ones if fit.

Thanks
by fotomickey
Thu Aug 06, 2015 12:34 am
Forum: Extruder
Topic: G2s compatible Jhead list
Replies: 25
Views: 15860

Re: G2s compatible Jhead list

Hi Eric

Please clarify model # for (1 full mendal j head).

Thanks
by fotomickey
Sat Aug 01, 2015 5:26 am
Forum: Extruder
Topic: G2s compatible Jhead list
Replies: 25
Views: 15860

G2s compatible Jhead list

Hi all experts Need recommendation on replacement Jhead hotends . G2S built projects is not going well due to failing hotends During calibration/ testing both stocked hotend fail miserably, 1 Jammed badly shortly after few test run and 1 is Clogged on arrival. When raise to preheat ABS tempature 240...
by fotomickey
Thu Jul 30, 2015 6:27 am
Forum: Extruder
Topic: FAQ
Replies: 21
Views: 32051

Re: FAQ

Yes gear does moved, when commanding from Repetier & LCD on G2S Extruder / Filament can move forward & backward. I suspect the walkthru something to do with Slic3r setup.

Can someone provide some sample profiles for G2S Slic3r setup & 1.75 PLA setup to test on prints ?

Thanks in advance