Search found 10 matches

by Aeonster
Thu Jul 30, 2015 8:13 pm
Forum: Stepper Motor
Topic: Adjusting DVR8825 Vref
Replies: 3
Views: 15867

Re: Adjusting DVR8825 Vref

Hi,

There is actually a pretty good youtube video about how to adjust the current for drv8825 drivers.
https://www.youtube.com/watch?v=89BHS9hfSUk

They go slowly step by step, I like that :)
by Aeonster
Thu Jul 30, 2015 8:07 pm
Forum: Others
Topic: Actual maximum print size?
Replies: 6
Views: 5357

Re: Actual maximum print size?

Hi, I had a similar problem, I'm not sure it's the same one though. My print-surface was also smaller than advertised, the issue was the washers used to keep the rods in place. They impede full movements. Video to show the problem: https://onedrive.live.com/redir?resid=D27D44560BF591CC!19046&authkey...
by Aeonster
Thu Jul 30, 2015 7:53 pm
Forum: Others
Topic: Auto-leveling problem
Replies: 6
Views: 5268

Re: Auto-leveling problem

I think I'll post my solution to this problem, so others can see. I solved the issue of the hot-end hitting the print bed after homing. In the firmware you have change the total print height, mine was set to 214, but in reality was 180-ish. The problem arise because once auto-leveling is complete th...
by Aeonster
Thu Jul 09, 2015 5:13 pm
Forum: Assembly
Topic: For people who wants STL files of parts
Replies: 50
Views: 72096

Re: For people who wants STL files of parts

Eric wrote:hi,every one!this is the updated stl files for delta rostock.please download it if needed.
Thank you Eric, awesome :)
by Aeonster
Thu Jul 09, 2015 1:18 am
Forum: Feedback&Suggestion
Topic: Please Remove Forum Post Approval System
Replies: 5
Views: 4905

Re: Please Remove Forum Post Approval System

Also by removing the approval system, other users can help other users on some issues :)

my 2 cents ;)
by Aeonster
Thu Jul 09, 2015 1:16 am
Forum: Others
Topic: Skew prints on print bed
Replies: 3
Views: 3102

Skew prints on print bed

Hi, I have a Rostock Mini G2s, when I print I've noticed my prints are somewhat skewed. I've made a small illustration to show the situation: skev3Dprint.gif The lightblue is the print on the printed bed. The gray is printbed, darkblue are the towers X/Y/Z and the Red line is a straight line to see ...
by Aeonster
Tue Jul 07, 2015 10:41 pm
Forum: Assembly
Topic: For people who wants STL files of parts
Replies: 50
Views: 72096

Re: For people who wants STL files of parts

Hi, I bought the Rostock mini G2s, could I get the STL files for the printed parts? I need to print out the whole extruder holder section because I cracked it. I would like to print out some spare before it breaks apart totally :O If it is not much trouble I would like to have a spare of all the pri...
by Aeonster
Thu Jul 02, 2015 11:12 pm
Forum: Others
Topic: Auto-leveling problem
Replies: 6
Views: 5268

Re: Auto-leveling problem

Hi, thanks I got the firmware, I did as you said. I lower the number, 0.6 to 0.5, 0.4, 0.3 and so on. All it does is making the "probing" area smaller but at the end of probing it still SLIDES down very hard on the bed-surface just like the video from earlier. So changing 0.6 to something lower did ...
by Aeonster
Thu Jul 02, 2015 11:35 am
Forum: Others
Topic: Auto-leveling problem
Replies: 6
Views: 5268

Re: Auto-leveling problem

How?
I don't have the firmware for my printer.
It's a Rostock mini G2s with a GT2560 board.
by Aeonster
Wed Jul 01, 2015 6:52 pm
Forum: Others
Topic: Auto-leveling problem
Replies: 6
Views: 5268

Auto-leveling problem

Hi, I'll post a video: https://onedrive.live.com/redir?resid=D27D44560BF591CC!19055&authkey=!AOZ1u3DYayDra2A&ithint=video%2cmp4 I don't understand why this is happening, at the end of the video the head just slides and hits hard on the corner. I have to abort fast to not inflict more damage. At firs...