Introduction of Geeetech Prusa I3 M201

Geeetech Prusa I3 M201

Geeetech Prusa I3 M201 is the 2-in-1-out version of our latest Prusa I3 series 3D printer. This is a fused filament fabrication printer, easy to use and also designed for DIYers and professionals alike.

Geeetech Prusa I3 M201

The M201 features our newly engineered the 2-in-1-out switchable hotend, that feeds 2 filaments through one nozzle. With the new 2-in-1-out hotend the M201 can work like a color palette, providing a new level of expression with your prints allowing you to create alternating colors, blending color and gradients.

Geeetech Prusa I3 M201

In order to achieve this we optimized the firmware that is driven by our newly developed GTM32 control system, which is based on the STM32 processor and paired with the ARM Coretex M3, running a dominant frequency of 72MHz, greatly improving the overall printing performance.

Geeetech Prusa I3 M201

We added a new feature, the Mixer, to the interface to control the percentage of the feed rate of the two filaments. To prevent the extruder from becoming jammed from over fused filament detained in the barrel we added an over fused protect feature or OFP which is enabled by default and keeps things running smooth. When using the OFP feature the maximum feed rate of the 2 filaments is no grater than 96% and no lower than 4%.

Geeetech Prusa I3 M201

First, in Mixer, you can custom the the feed rate proportion of the two filament to generate new colors, that is a kind of blending color. The sum feed rate of Filament 0 and Filament 1 is 100%. If you manually adjust either of the two values, system will automatically work out the other value. The proportion will not change unless you change it or choose other printing scheme. Different feed rate proportions can be used in one printing item.

Second, in Mixer>Templates, we have prepared 4 pairs, 8 kinds of built-in gradient templates for you to choose to print items with gradient colors. In this scheme, the feed rate proportion of two filament will vary with the printing process, and the waxing and waning proportion of two filament is reflected on the inform screen, so you can estimate the time duration and prepare for the next templates.

Geeetech Prusa I3 M201

Geeetech Prusa I3 M201

For the 8 templates, the greater the number is, the more apparent the gradient color will be. You can use any combination of these templates to generate items with diversified visual experience and making your printed works stand out in those tedious and monotonous models. These printing scheme can be manually adjusted in the menu of Control/Mixer on the LCD control panel easily, the system will be subjected to the latest option as default.

This M201 3D printer maintains DIY property, with which you can unleash your creativity to refit or modify it as you like. This kit is just the beginning; you can get more out of it.

Feature:

  1. Self-developed control system based on STM32 processor, paired with the ARM Coretex M3, running a dominant frequency of 72MHz, greatly improving the overall printing performance.
  2. Optimized firmware, with new feature of adjusting the proportion of feed rate from two extruders to print items with blending color or gradient colors.
  3. 2-in-1-out switchable hotend, works like a color palette, providing a new way to print items in two different colors or gradient colors.
  4. 280x210x200mm printing volume, able to printer larger models than most of the I3 printers on the market.
  5. Up to 0.1mm printing precision, matching competitors that costs 10 times more on the market.
  6. With LCD 2004 controller and SD card reader, support stand-alone printing.
  7. Super-flat aluminum alloy print surface for better adherence.
  8. 3D printing filaments compatible: PLA, ABS

Followings are some pictures of items printed by I3 M201. We can can see great printing effect of blending color and gradient color.

Geeetech Prusa I3 M201

Geeetech Prusa I3 M201

Geeetech Prusa I3 M201

Geeetech Prusa I3 M201

Specification

Printing specifications:

Print technology:FDM

Build volume: 280 x210x200mm

Printing resolution: 0.1-0.3mm

Print Speed: 60-110 mm/s

Filament diameter: 1.75mm

Nozzle diameter: 0.4mm

Filament type: PLA, ABS

 

Software:

Operating system: Windows/Mac/Linux

Control software: Repetier-Host, Printrun

File format: .STL,G-code

 

Temperature:

Max heated bed temperature:  about 110 °C

Max extruder temperature:  about 240°C

 

Electrical:

Power supply:

Input: 115V/1.5A or 230V/0.75A

Output:DC24V/0-15A

Connectivity: USB, SD card (support stand-alone printing)

 

Mechanical:

Frame: Laser-cut Acrylic plate of 8 mm thickness

Build Platform: Super-flat aluminum alloy+ heatbed

XYZ Rods: Wear-resistant, stainless steel

Stepper Motors: 1.8°step angle with 1/16 micro-stepping

 

Physical Dimensions & Weight

Machine Dimension: 510x 450 x 450 mm

Shipping box Dimension: 510 x 470 x 155 mm

Machine Net weight: 9.5kg

Machine Shipping weight: 10.5kg

 

This is introduction for Geeetech I3 M201, click the link for purchasing.http://www.geeetech.com/geeetech-prusa-i3-m201-3d-printer-diy-kit-p-965.html

Introducing Gradient Color PLA Filament

Product information:
One of the recurring issues in 3D printing is how to colorize the objects produced to the best. Prior to the introduction of colored filaments, a monochromatic creation could have color applied only after completion. Since then a variety of color printing processes have been developed.
gradient color PLA filament
The process of gradient color printing has introduced an entirely new and challenging set of requirements to the process of 3D printing and is garnering a great deal of interest in the 3D printing community. Specific extruders and hotends that support two mono-color filaments rised in response to desire of gradient color. However, most of time you need to learn how to set up for the printer to achieve the desired effect, which is quite complicated especially to our DIYers.
Now, with the advent of this gradient color filament, you can print multi-color object with one single extruder and it is that easy as to print one mono-color filament. This gradient color filament is integrated with nearly 15 colors, red, pink, yellow, orange, blue, green and brown…, which generates more exciting printing effects.

As this gradient color filament is a iteration of the regular PLA, so, they share the same printing parameters, just use them as the regular PLA. This filament can be used in any printer creating much broader access.

gradient color PLA filament gradient color PLA filament
Specification:
Net weight: 1kg
Filament diameter: 1.75mm

Picture preview of the printing effect:

Gradient Color PLA Filemant

Introducing Geeetech Aluminum Prusa I3 3D Printer kit

Geeetech Aluminum Prusa I3 3D Printer kit

 

This Aluminum Prusa I3 3D Printer is modified and manufactured by Shenzhen Getech Co., Ltd., based on Prusa i3. With features of extremely simple assembly, easy debugging and more stable performance, the Aluminum Printer is an ideal reference for you. The new frame is made from aluminum for durability and extending service life. In addition, a LCD panel is added as an integrated component of the printer, setting in the front top frame. 

In sum, this Aluminum Prusa I3 3D Printer DIY kit offers a significant experience for you to learn 3D printing from scratch, this kit that includes all the parts you need to build your first 3D printer will be the best valued purchase for you. If you are a starter, we have manuals and videos for step-by-step assembly and an active support service via forum to help with any queries you might have.

Geeetech Aluminum Prusa I3 3D Printer kit

Improved Features:

 1.Simplified structure means super fast assembly and easy adjustment. 

 2.6mm -thickness aluminum chasis for high strength and durability.

 3.In-built LCD control panel for easy operating, SD Card Reader support stand-alone printing 

 4.Standard printing area: 200 x 200 x 180 mm.

 5.Multi filaments compatibility: PLA, ABS, Nylon, Wood and Flexible PLA.

 6.Constructed with MK8 extruder to provide high-resolution printing.

 7.No soldering required for assembly.

全铝I3切图_05

全铝I3切图_07

 

Printing specifications:

Print technology: Fused Filament Fabrication.

Build volume: 200 x200x180mm 

Layer resolution: 0.1-0.3mm

Positioning Precision: 0.1-0.3mm 

Filament diameter: 1.75mm, 

Nozzle diameter: 0.3mm, 0.35 mm,0.4mm

Filament type: ABS/ PLA/Nylon Filament/Flexible PLA/Wood

 

Software:

Operating system: Windows/Mac/Linux

Control software: Repetier-Host, Printrun

File format: .STL , G-code

 

Temperature:

Max heated bed temperature: about 110°C 

Max extruder temperature: about 240°C 

 

Electrical:

Power supply:

Input: 110V/4.8A   220V/2.4A

Output:DC12V/15A

Connectivity: USB, SD card (support stand-alone printing)

 

Mechanical:

Body: aluminum plate of 6 mm thickness (silver-grey)

Build Platform: Borosilicate glass + Aluminium plate 

XYZ Rods: Wear-resistant, stainless steel  

Stepper Motors: 1.8° step angle with 1/16 micro-stepping

Physical structure: Reprap

 

Physical dimensions:

Machine size: 450x380x435mm

Shipping box: 520 x 420 x 230 mm

Net weight: 7.2 kg 

Shipping weight: 11.5kg

geeetech tech support

 

for detailed building instructions, please download here . 

this model of prusa I3 is under pre-order, you can  go and add one to your cart. 

 

Introducing XZN-6 2.4GHz remote-control radio

XZN-6 2.4GHz remote-control radio

The XZN-6 remote-control radio is a great entry level 6-channel telemetry 2.4ghz computer transmitter that uses solid and reliable Frequency-hopping spread spectrum (FHSS) spread spectrum technology. The XZN-6 has both a nice quality look and feel, while the programming is simple to use. The XZN-6 also has so many impressive list of features that it is suitable for both model Heli and Airplane, the Turnigy XZN-6 is a superb budget computer radio for both new pilots and experienced pilots alike!

XZN-6 2.4GHz remote-control radio

XZN-6 2.4GHz remote-control radio

Basic parameters:

1.Application: Helicopter, airplane, car and boat.

2.TX power: less than or equal to 70Mw.

3.TX frequency: 2.400GHz—2.483GHz

4.Ground control range: more than 500m

5.Power requirement of transmitters: DC+6V (4AAA battery)

6.Power requirement of receiver:DC+6

7.Trim: digital trim

8.Modulation: Latest FHSS technology

9.Code: PCM 1024

10.weight:550g

11.Color: white

 Quick Start Guide of XZN-6 2.4GHz remote-control transmitters and receiver 

1.Turn off the power of transmitters and receiver.

2.Connect a black plug of frequency-line to a receiver’s BIND port .

3.Connect the signal line of BEC to the third channel of receiver. And power on BEC from battery.

4.Pay attention to receiver’s LED, there will be a green light flashing continuously.

5.Sets the throttle of the transmitters at minimum speed..and turn on the transmitters.

6.The frequency adjustment of receiver is finished, when its green LED light stops flashing.

7.Remove the bind plug from receiver.

8.you can connect aileron servo,elevator servo,direction servo to receiver according to your operation instruction of aircraft model.

9.Finally, you need ensure that your transmitter can totally control binding receiver, and check whether every channels is normal or not.

10.If this test failed, please repeat the whole procedures and try again.

 XZN-6 2.4GHz remote-control radio

xzn6-24ghz-remotecontrol-radio

Notices:

1.If you were an inexperienced pilot, please ask for a flight instructor to check you aircraft model. R/C model is not a toy; it may lead to severe accident and damage caused by maloperation.

2.Playing a aeroplane model at flight place, please comply with local regulations to test your 2.4GHz remote-controller.

3.Make sure your wireless system has enough operation range. You can walk away from model, and inspect if the control of model is normal in every channel at the same time. The model will not loss control even if you walk away 30 to 50 steps.

4.Make sure the battery has enough power. Please change transmitter’s battery when you hear low-power alarm and see red power light flashing.

Geeetech prusa I3 X

This is the printing test of our geeetech prusa I3 X.

Geeetech Prusa I3 X is a new member of the prestigious Prusa I3 family, it was engineered to provide redefined usability, quality, performance and most important, best affordability in desktop 3D printer market.

Quick-release feed gears for faster and fluent filament feeding

Super-flat aluminum alloy print surface for better adherence

200x200x170mm printing volume, just right for you

Stainless steel rail rods, gears, bearings and connectors for smoother movement

for more information, please visit here

 

introducing Delta Rostock mini G2 & G2s

Rostock mini G2

This Rostock mini G2s is a companion piece of our new upgraded delta 3D printer -Rostock mini G2. G2s is designed to support dual extruder. 

With G2s you can print a single two-color object, or you can print two objects in one print job, each made from a different color. You can also print one single-color object, as with other single-extruder 3D printers. Or you can use one extruder for infill or support. The 2 extruder motor pushes filament through 2 head separately, so mixing colors printing is not applicable for the moment.

This G2s is powered by our newly designed control system—GT2560 that supports 2 extruders and eliminates the complicated wiring of Mega2560+Ramps 1.4 and it is more space-saving.

An auto-leveling probe is also added on G2; which means you do not have to adjust it every time before you start printing, after the first assembly work, you can almost plug and play. 

In terms of printing filament, G2s not only supports PLA and ABS, Nylon and wood filament is also available, which enables more possibilities to create 3D printing project. 

This G2s is also improved with LCD control panel; you can monitor the printing process in real time and with a SD card it can realize stand-alone printing, very convenient. 

 Rostock mini G2S

Main features:

1. With dual extruder, support multiple way of printing. 

2. Support PLA, ABS, Nylon and Wood, giving more possibilities to create 3D printing project. 

3. New updated control system.

4. Auto-leveling and auto-calibration. 

5. More flexible effectors and diagonal rods. 

6. More fluent printing process and higher precession.

 

Specifications:

Print Volume: 170 x 200mm

Chassis: laser -cut acrylic plate

The Layer Thickness: 0.1mm

Layer Resolution: 0.1mm

Filament Diameter: 1.75, 3mm

Nozzle Diameter: 0.3, 0.35, 0.4, 0.5mm

Print Speed:  60 to 120 mm/sec

Print Plate Size: 210 x 3mm

Print Plate (Build Platform): aluminum plate + heatbed

XYZ Bearings: carbon steel

Stepper Motors: 1.8° step angle with 1/16 micro-stepping

Max Heated Bed Temp: about 110 ℃

Max Extruder Temp: about 240 ℃

AC Input: 115V/1.5A   230V/0.75A

Output:DC12V/0-15A

No. of Extruders: 2 

Connectivity (Interface): USB, SD Card

Electronics: GT2560

3D printing Software: Repetier Host

CAD Input data file format supported: STL, G code 

Client Operating System: Windows, Linux, Mac

Machine Dimensions: 320 x 320 x 870mm

Machine weight:9kg  

Shipping box dimensions:495*395*195mm

Shipping box weight:10kg

 

For detailed instruction, please refer to its wiki.

Bocusini – World’s first plug & play 3D Food Printing System

if you think 3Dprinting has nothing to do with your life, because you have no idea about this elcotronics things,you are almost wrong, take a look at this 3d pritner, it is not a usual 3d printer, it can print food, let’s say desert or ice cream that is as cute and exquisite as what you eat in a high-class restaurant, and now, with this food printer, you can make delicated desert at home. food 3d printing

Bocusini is an easy-to-use open source food printing system for gastronomy, patisserie and home applications. It consists of a heated food printing head mounted to a standard 3D printer, a selection of easy to change cartridges with printable food, an intuitive user interface and the Bocusini.com web platform with creative food designs and recipes.

 3d printing food

The Bocusini printer can be used right out of the box. It is plug & play. This makes it the perfect tool for creative chefs or confectioners as well as for creative end users.Just plug in the printer, drag & drop your favorite designs from the Bocusini web platform, or easily create your own food ideas on your smart device – without prior software installation or food printing knowledge – like the in the example below, our confectionary “Prince Charming” with frogs 3D printed from marzipan:

 Insert your food cartridge in the Bocusini and watch your creative food items and pictures being formed within several minutes. Surprise your customers, family, friends or guests with your delicious food creations in sweet or savory. 

 3d printing food2

What is food printing?

There is nothing mysterious about food printing – it is just the dosing of a food product like melted chocolate, mashed potatoes or a cookie dough layer by layer onto a plate by a small nozzle – the principle of food printing is nothing more than a very precise automatically controlled pastry bag. 

 How does the Bocusini work?

With Bocusini your focus will be on creativity and fun – not on the technical details. Food printing is kept simple and will be achieved with only 3 steps:

1. Load the bocusini food printer with a food capsule of your choice

2. Create your own design or download a printing template onto your smart device and select the printing conditions for your food capsule

3. Put your plate to the printer and start printing.  

That’s all. Within several minutes your individually created and delicious food object will be printed.

food printer

 

If you are a delicated foodie, you should not miss this food printer. you can still purchase or support  it by headin over to his campaign page!

Friends – the 2in-1 out switching hotend

海报750x750-速卖通

Friends is a new type of extrusion system with 2in, 1out switchable Hotend which takes your printer to a whole new level. Friends provides a new way to print items in two different colors or gradient colors, giving rise to infinity visual experience and making your printed works stand out in those tedious and monotonous models. You can also use one extruder as infill or support, which provides you more creativity to print diversiform and structural models.

Dual Extrusion hotend

switching hotend

Another cool feature is the ability to print with multiple materials, such as PLA, ABS, Wood, Nylon, and PAV. You can combine them to print models with multiple properties.

Multiple colors, multiple materials, unique structure, all these make Friends undoubtedly the best choice for you to convert your single-extrusion printer into a dual-extrusion one. It can be easily applied to almost any machine, including classic Delta machines, vertical X-carriage machines and many others. In addition the minimum size and weight greatly reduce the load of the machine and increase the speed of the motion and the print performance.

 switching hotend

Specifications

Molding form: FDM

Printing resolution: 0.1mm

Printing thickness: 0.1mm-0.3mm

Recommended input voltage: 12V

Cooling fan operating voltage: 12V

Heating rod voltage: 12V

Nozzle temperature: 180℃-260℃

Material: aluminum

Net Weight: 80g

Outline dimensions: 35*15*60mm (L/W/H)

Filament size:1.75

Nozzle diameter: 0.4 & 0.5mm available

tips:

this dual extrusion hotend is more recommened to be used on a wade’s extruder for larger torque force.